Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Set the camcorder to mode and adjust the focus manually (070). -When the subject is too bright, [Overexp.] will flash on the screen. In such case, use the optional FS-H37U ND filter. • Under certain conditions, the Smart AUTO icon that appears on the screen may not match the actual scene. Especially when shooting against orange or blue backgrounds, the Sunset or one of the Blue Skies icons may appear and the colors may not look natural. In such case, we recommend recording in y manual mode (054, 99). • In mode, menus cannot be accessed but the following settings can be changed in advance, before setting the mode switch to 5. -7/8 menu: [AF mode], [Auto Slow Shutter], [POWERED IS Button]. -8 menu: [Video Snapshot Length], [Rec Media for Movies]*, [Recording Mode], [Rec Media for Photos]*, [Photo Quality/Size], [Simultaneous Recording]. -6 menu: All settings. * b only. Dual Shot Mode .. 41 Zooming Operating modes: There are three ways you can zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using the zoom controls on the touch screen. In addition to the 15x optical zoom*, in mode, you can turn on the 300x digital zoom with the 7 8 [Digital Zoom] setting. * When [Image Stabilizer] (FUNC. panel) is set to [P Dynamic], you can use the advanced zoom to magnify the image up to 18x. Using the Zoom Lever or Wireless Controller Move the zoom lever toward Q (wide angle) to zoom out. Move it toward P(telephoto) to zoom in. • By default, the zoom lever operates at a variable speed – press gently for a slow zoom; press harder for faster zooms. • You can also use the zoom buttons on the wireless controller. Using the Touch Screen’s Zoom Controls W Zoom out T Zoom in 1 Display the zoom controls on the touch screen. [FUNC.]* 8 [ZOOM] * Not necessary in mode. • The zoom controls appear on the left side of the screen. 42 • Dual Shot Mode 2 Touch the zoom controls to operate the zoom. Touch anywhere within the Q area to zoom out or anywhere within the P area to zoom in. Touch closer to the center for a slow zoom ([Speed 1]); touch closer to the e/d icons for faster zooms ([Speed 3]). 3Touch [a] to hide the zoom controls. NOTES • Keep at least 1 m away from the subject. At full wide angle, you can focus on a subject as close as 1 cm. • In or mode, you can also set 7/8 8 [Zoom Speed] to one of three constant speeds (3 is the fastest, 1 the slowest). • When [Zoom Speed] is set to [I Variable]: -When you use the Pand Q buttons on the wireless controller, the zoom speed will be constant at [JSpeed 3]. -The zoom speed will be faster in record pause mode than when actually recording, except when pre-recording (061) is activated. • See Specifications (0194) for notes about this function when the recording program is set to [rUnderwater] or [sSurface]. Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second*, allowing you to record the subject right away. * The actual time required varies depending on the shooting conditions. Operating modes: 1 With the camcorder on and in a recording mode, close the LCD panel. A beep will sound and the green ON/OFF (CHG) indicator will change to orange to indicate the camcorder entered standby mode. Dual Shot Mode .. 43 2 When you wish to resume recording, open the LCD panel. The ON/OFF (CHG) indicator turns back green and the camcorder is ready to record. IMPORTANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange). NOTES • The camcorder will not enter standby mode if the LCD panel is closed while the ACCESS indicator is on or flashing or while a menu is being displayed. The camcorder may also not enter standby mode if the LCD panel is closed while the memory card slot cover is open or when the battery charge is too low. Check that the ON/OFF (CHG) indicator changes to orange. • About standby mode and auto power off: -The camcorder will power off automatically if left in standby mode for 10 minutes. Press x to turn on the camcorder. -You can select the length of time until shut-off or turn off the Quick Start function altogether with the 68 [Power Saving Mode] 8 [Quick Start (Standby)] setting. -The usual 5-minute auto power off setting of [Power Saving Mode] is not applicable while the camcorder is in standby mode. • Changing the position of the mode switch while the camcorder is in standby mode will reactivate the camcorder in the operating mode selected. 44 • Dual Shot Mode Video This chapter covers functions related to movies, including playback, advanced shooting, advanced functions and playlist and scene operations. For details about basic video shooting, refer to Dual Shot Mode (038...