Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Choose the transition speed — manual, fast (every 4 frames), moderate (every 6 frames) or slow (every 8 frames) — at which to capture a moving subject, such as a person playing tennis or golf. Sound is recorded normally. E 4 images 9 images 16 images Operating the multi-image screen When operating the multi-image screen in MOVIE, P.SCAN or CARD REC mode, make sure the program selector is set to Q. In VCR mode, you can only operate the multi-image screen in the following playback modes: When M.S.SPEED is set to MANUAL: Still picture playback, slow forward/ reverse playback When M.S.SPEED is set to FAST, MODERATE or SLOW: Still picture playback D.E.SELECT••MULTI-S M.S.SPLIT•••4 D.EFFECTS M.S.SPEED•••MANUAL CARD RECMOVIE P.SCAN VCR ( 34) Select multi-image screen 1. Open the menu and select D.EFFECTS. 2. Select D.E.SELECT. 3. Select MULTI-S. • You return to the D.EFFECTS submenu. 4. Select M.S. SPEED. • MANUAL, FAST, MODERATE and SLOW settings appear. 5. Select the desired setting. 6. Select M.S. SPLIT. • 4, 9, 16 settings appear. 7. Select the desired setting. Using the FullRange of Features 63 3_ELURA2_E(33-79) 7/25/00 17:10 Page 64 8. Close the menu. • The digital effects menu disappears. • MULTI-S flashes in the display. E Multi-image screen on/off 9. Push the D.EFFECTS ON/OFF button. • Manual: As you press the ON/OFF button, scenes will be captured one after another the indicated number of times. If you push and hold the ON/OFF button for more than a second, the last image captured will be erased. • The currently recording image is framed in blue. The frame disappears after the last image is captured. • Automatic: The camera will capture the indicated number of images at the indicated speed. 10.If you’re in MOVIE or P.SCAN, push the start/stop button to begin recording. • The multi-image screen is recorded to the tape. • ELURA2 MC only: If you’re in CARD REC mode, push the PHOTO button to record the multi-image screen to the MultiMediaCard. Using the FullRange of Features • You cannot use the multi-image screen with digital zoom or the 16:9 mode. • You can operate the multi-image screen from record or record pause mode. • After all the images have been captured, push the ON/OFF button quickly to cancel the multi-image screen. • If you are operating the multi-image screen in VCR mode and you stop or pause the tape, or press any other playback button or the date/photo search buttons, the multi-image screen will be canceled. (This does not apply with the MANUAL multi-image speed.) • You cannot use digital zoom when the multi-image screen is set. The display becomes “– – –”. 64 3_ELURA2_E(33-79) 7/25/00 17:10 Page 65 Audio Recording Selecting the audio mode ELURA2/ELURA2 MC can record sound on a tape in two audio modes — 16 bit and 12 bit. The 16 bit mode produces the higher sound quality (slightly superior to CD) while the 12 bit mode records on two channels (stereo 1), leaving 2 channels free (stereo 2) for you to add new sound at a later date. E AUDIO MODE••12bitVCR SET UP ( 34) MOVIE P.SCAN VCR To switch to the 16 bit mode, open the menu and select VCR SET UP. Then select AUDIO MODE, set it to 16 bit and close the menu. • “16 bit” is shown in the display for approximately 4 seconds. • For details on adding new sound, see p. 88. • For details of playing back a tape that has new sound on stereo 2, see p. 91. Using the FullRange of Features • When you record to the ELURA2/ELURA2 MC from a camcorder with DV terminal outputs, the audio mode display becomes set to “– – –.” External microphone and headphones MIC For greater creative control over audio recording, you can connect an external microphone to the camera via the DU-300 Docking Unit’s MIC terminal. Attach the microphone to the optional SA-1 Adapter Bracket. 1. Attach the microphone to the adapter bracket. • Extend the adapter bracket open until it locks. 2. Attach the adapter bracket to the docking unit. 3. Connect the microphone. 65 3_ELURA2_E(33-79) 7/25/00 17:10 Page 66 E You can monitor the sound while recording and playing back by attaching stereo headphones to the H terminal on the docking unit. You can adjust the volume of attached headphones by turning the SELECT dial. • A VOLUME bar appears in the display to indicate the current volume. The volume level is the same regardless of mode. • The SELECT dial also controls the speaker volume once you remove the headphones from the headphone socket ( 65). • The levels you adjust for the built-in speaker and headphones are memorized separately. The camera remembers your levels even if you turn the camera off and back on again. Wind screen The camera has an automatic wind screen to prevent wind noise from interfering with the sound track of a tape. As a rule, use the wind screen when recording outdoors. Make sure it’s off when recording indoors, where there is no wind to affect your recording. WIND SCREEN••ONVCR SET UP ( 34) MOVIE P.SCAN VCR Using the FullRange of Features To turn it off, open the menu a...
Dieses Handbuch ist für folgende Modelle:Kameras - Elura 2MC (5.57 mb)