Stimmen - 0, Durchschnittliche Bewertung: 5
(
)
)
|
Fotos und technische Daten Canon XL H1S |
Anleitung Zusammenfassung
Screen Displays during Playback Audio monitor ( 90) Audio output ( 90) Custom function ( 104) Custom keys ( 79) Data code ( 117) Date search ( 117)/ Index search ( 116)/ End search ( 41) Recording standard ( 40) Frame rate ( 50) Tape operation ( 114) Recording Record pause Stop Eject Playback : Playback pause : Fast forward : Rewind : Fast forward playback/rewind playback : Playback (double speed) : Playback (normal speed) : Frame advance/reverse User bit ( 56) Audio level indicator ( 59) Slideshow ( 127) Image protected ( 130) Image number ( 120) Current image/total number of still images ( 119) Histogram ( 128) Exif information icons ( 128) Date and time of recording Custom preset data embedded with the still image ( 99) Still image quality/size Programmed AE ( 62) Metering mode ( 125) AE shift ( 69) Still image size ( 119) File size Aperture ( 65, 68) Additional Information Shutter speed ( 65, 67) White balance ( 71) Side panel Time code Video signal standard Time code setting Video output signal from the HD/SD SDI Terminal Manual audio adjustment Tape has reached the end Remaining battery charge Time code synchronization setting Audio level indicator 143 List of Messages (in alphabetical order) Message Explanation CARD ERROR A memory card error occurred. The camcorder cannot record or play back the image. The error may be temporary. If the message disappears after 4 seconds and flashes in red, turn the camcorder off, remove the card and reinsert the card. If changes to green, you can continue recording/playback. – CARD FULL No remaining capacity on the memory card. Replace with another card or erase images. – CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 17 CHECK THE HDV/DV INPUT DV cable is not connected, or the connected digital device is turned off. 93 CHECK THE LENS Lens is not correctly mounted. Turn the lens until it clicks. If the message does not disappear, unmount and remount the lens. – CONDENSATION HAS BEEN DETECTED Condensation has been detected in the camcorder. 149 COPYRIGHT PROTECTED DUBBING RESTRICTED You attempted to dub a copyright protected tape. May also appear when an anomalous signal is received during analog line-in recording, or during analog-digital conversion of a copyright protected tape. 93 COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED You attempted to play back a copyright protected tape. 93 ENTERING “POWER STANDBY” Appears for 1 second when you press the STANDBY button. – HD INCOMPATIBLE LENS You mounted a lens that does not support HDV recording. HEADS DIRTY, USE CLEANING CASSETTE Video heads are dirty. Clean the video heads. 148 INCORRECT TAPE SPECIFICATION PLAYBACK IS RESTRICTED You attempted to play back a tape recorded in a standard different than the one to which is the camcorder is set. – INPUT SIGNAL NOT SUPPORTED You attempted to input a video signal incompatible with the camcorder (for example 720p). 93 NAMING ERROR The folder and file numbers have reached their maximum value. – NO CARD Memory card not is inserted into the camcorder. 32 NO IMAGES No images are recorded on the memory card. – PLAYBACK STD LOCKED INCOMPATIBLE VIDEO INPUT When the playback standard is already set in the camcorder, you attempted to input a video signal in a standard different from that set. 93 PLAYBACK STD LOCKED PLAYBACK IS RESTRICTED When the playback standard is already set in the camcorder, you attempted to play back a tape in a video standard different from that set. 114 REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it. 31 SET THE TIME ZONE, DATE AND TIME You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. 34 TAPE END Tape reached the end. Rewind the tape or replace the cassette. – THE CARD IS SET FOR ERASURE PREVENTION SD/SDHC memory card is set for erasure prevention. Replace the card or change the position of the LOCK switch. 32 THE MEMORY CARD COVER IS OPEN Close the memory card cover. THE TAPE IS SET FOR ERASURE PREVENTION Cassette is protected. Replace the cassette or change the position of the protect switch. 147 THIS LENS HAS NO STILL SHOOTING CAPABILITY You mounted a lens that does not support still image recording. UNIDENTIFIABLE IMAGE Image is not recorded with JPEG compression, or with a compression not compatible with the camcorder, or the image file is corrupted. – Maintenance/Others Camcorder Handling Precautions ..Do not carry the camcorder by the viewfinder, the microphone or its cable. ..Do not leave the camcorder in places subject to high temperatures, such as a sun-heated car, and high humidity. ..Do not use the camcorder in places subject to strong electromagnetic fields such as near TV sets, plasma TVs, radio transmitters or portable communication devices. ..Do not point the lens or viewfinder at strong light sources. Do not leave the camcorder pointed at a bright subject. ..D...
Dieses Handbuch ist für folgende Modelle:Kameras - XL H1A (8.92 mb)