Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• When the Auto Power Off function is set to "5 Min", the Auto Power Off function works with priority rather than Demo function. If you execute Demo function, release the Auto Power Off function. .page 88 • Press and hold MENU button for 5 seconds in STBY mode to run the Demo function immediately. English_89 connecting to a PC . This chapter explains how to connect a PC using the USB cable for various actions. -To connect an USB cable to a PC, refer to the software installation instructions and available PC specification. TRANSFERRING A RECORDED FILE THROUGH A USB CONNECTION • The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) • You can transfer a recorded file on a storage media to your PC via a USB connection. USB Connection Speed depending on the System • High speed USB connection is supported by Microsoft (Windows) device drivers only. • Windows 2000 - High speed USB on a system with Service Pack 4 or later installed. • Windows XP - High speed USB on a system with Service Pack 1 or later installed. • Windows VISTA - High speed USB on a system with Service Pack 1 or later installed. Cyberlink MediaShow4 System Requirements The following requirements must be satisfied to use CyberLink MediaShow4. CPU Intel® Pentium ®4, at least 3.0 GHz/AMD recommended OS (Operating System) Windows Vista or XP (Windows XP Service Pack 2) * Standard installation is recommended. Operation may not assured if the above OS has been upgraded. RAM 512MB (1 GB and above recommended) Resolution 800 x 600, 16-bit colour or higher USB USB2.0 High Speed VGA Intel® 945GM or faster NVIDIA Geforce 6600 or higher ATI Radeon X1600 or higher -On a low performance graphics system, running the MediaShow4 may cause error or not apply some of animation effects. Miscellaneous Internet Explorer 5.5 or later DirectX 9.0 or later Supported media DVD+R/RW, DVD-R/RW For the compatible DVD/CD burners, refer to CyberLink web site: English_90 System requirements mentioned above are recommendations. Even on a system that satisfies the requirements operation is not ensured depending on the system. On a Macintosh computer, you can also transfer data by connecting the USB cable, but the provided CyberLink MediaShow4 is not Macintosh-compliant. On a Macintosh computer, you can upload recordings using the iMovie application. This memory camcorder can be used only as a removable storage device for the computers with Macintosh (OS version 10.3 or later) and Windows 2000. On a slower PC than recommended, movie playback may skip frames or operate unexpectedly. If your OS is Windows XP/Vista, log in as the Administrator (administrator of the PC) (or a user with the equivalent privileges) to install the software. Check out the storage media of the memory camcorder before connecting USB cable. If no memory card or an unformatted memory card is inserted, the PC will not recognise your memory camcorder as a removable disk. If you disconnect the USB cable from the PC or the memory camcorder during the data transfer, the data transfer will stop and the data may be damaged. If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again. Intel® Pentium III® or Pentium ®4 is a trademark of the Intel Corporation. Windows® is a registered trademark of the Microsoft® Corporation. All other brands and names are property of their respective owners. CyberLink MediaShow4 is optimised for Intel Core 2 Duo processors and CPUs with MMX, SSE, SSE2, 3DNow!, and Intel HyperThreading technology. DirectX is necessary so that CyberLink MediaShow4 works properly and it is automatically installed during CyberLink MediaShow4 installation. We recommend using the AC power adaptor as the power supply instead of the battery pack. English_91 connecting to a PC INSTALLING THE CYBERLINK MEDIASHOW4 CyberLink MediaShow4 is a software for easy of editing MPEG, AVI, and other video files, still images, and other contents for creating a movie. This software has an interface that allows editing in either timeline or storyboard mode, maintains superior image quality, uses SVRT (Smart Video Rendering Technology) for high-speed rendering, and has a host of other advanced video editing features. This manual only refers to software installation and PC connection. For more details on software, refer to the “Online help/Readme” on the CyberLink MediaShow4 CD. Before you begin: Quit any other software you are using. (Check that there are no other application icons on the status bar.) 2 1. Load the provided CyberLink MediaShow4 CD-ROM into the PC. • The setup screen appears several seconds. If the setup screen does not appear, double click the CD-ROM icon in the “My Computer” window. • Click “Install Now.” 3 2. Select the desired language and...
Dieses Handbuch ist für folgende Modelle:Kameras - SMX-F300RP (11.19 mb)
Kameras - SMX-F300SP (11.19 mb)
Kameras - SMX-F30BP (11.19 mb)
Kameras - SMX-F30LP (11.19 mb)