Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Some cards may not be compatible depending on the memory card manufacturer and memory card type. • Proper operation is not guaranteed for those memory cards that are not formatted by this camcorder. Perform the formatting directly on the camcorder. • To facilitate video recording, it is recommended to use a memory card that supports faster write speed. (Write speed: 2MB / sec or higher) If you use a low write speed memory card, recording may stop with a message of "Low speed card. Please record a lower resolution." • It supports proper operation with up to 32GB of memory card for recording / playback. Memory cards bigger than 32GB in capacity may not work properly. • The memory card that is used to store a video can cause unwritable areas, which may result in reduced recording time and free memory space. • The maximum size of a video (H.264/AVC) file that can be recorded at one time is 1.8GB. • You can store up to 9,999 videos and photos in one folder. • Videos (or photos) recorded by other equipment are not playable on this camcorder. • Items marked with * are available only with 8GB (SMX-C13 only),16GB (SMX-C14 only) models. • For recording, 16:9 aspect ratio will use more memory than 4:3 aspect ratio. 44_English recording Basic procedures to record a videos or photos are described below and on the following pages. RECORDING VIDEOS The camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the one that works best for you. 1. Open the LCD screen and press the Power ( ) button to turn on the camcorder. Connect a power source to the camcorder. .page 16 (A battery pack or an AC power adaptor) Set the appropriate storage media. .page 38 (SMX-C13/C14 only) (If you want to record on a memory card, insert the memory card.) 2. Check the subject on the LCD screen. 3. Press the Recording start/stop button. The recording indicator ( ) will display and recording will start. To stop recording, press the Recording start/stop button again. 4. When recording is finished, turn the camcorder off. • • • • • 0:00:00 [245Min] ................ quick View Using the Quick View function, you can view the most recently recorded video or photo image right after your recording. 1. Press the OK button in STBY mode right after your recording. Shortcut menu (OK guide) is displayed on the LCD screen. 2. Press the Control button (.) to view the most recent video (or photo) you have recorded. After the Quick view is finished, your camcorder switches back to the STBY mode. During a Quick view, use the Control buttons ( . / . / . / .) and the OK button for playback search or deleting the current file. • •• 0:00:00/0:00:55 100 0001 Quick V ew ExitThe Quick View function is not available in the following conditions: -If the mode has been changed after the recording or the camcorder is connected USB cable -If the camcorder has been restarted after the recording Do not disconnect the power source (battery pack, AC adaptor, etc) during recording. Otherwise, it may cause damage to the storage media or data corruption. WARNING For on-screen information display. .page 25 Eject the battery pack when you have finished recording to prevent unnecessary battery power consumption. For various functions available when you record videos. .pages 56~70 During recording, some button operations are unavailable. (Mode ( ) button, MENU button, etc.) Sound is recorded from the internal stereo microphone on the front of the camcorder. Take care that this microphone is not blocked. English_45 recording Before recording an important video, make sure to test the recording function to check if there is any problem with the audio and video recording. Do not operate the Power ( ) button or remove the memory card while accessing the storage media. Doing so may damage the storage media or the data on the storage media. This camcorder provides one combined video and photo record mode. You can easily record videos or photos in the same mode without having to change it. (SMX-C13/C14 only) You cannot use a locked memory card for recording. You will see a message saying recording is disabled due to the lock. You can switch the play mode to the record mode by pressing the Recording start/stop or Mode ( ) button. If the power cable/battery is disconnected or recording is disabled during recording, the system is switched to the data recovery mode. While data is being recovered, no other function is enabled. After data recovery, the system will be switched to the STBY mode. When the recording time is short, the data recovery might fail. RECORDING WITH EASE FOR BEGINNERS (EASY q MODE) • With the EASY Q function, most of the camcorder settings are automatically adjusted, which frees you from detailed adjustments. 0:00:00 [245Min] STBY ................ 1. Open the LCD screen and press the Power ( ) button to turn on the camcorder. 2. Press the EASY Q button. When you press the EASY Q button, most fun...
Dieses Handbuch ist für folgende Modelle:Kameras - SMX-C100GP (17.14 mb)
Kameras - SMX-C100RP (17.14 mb)
Kameras - SMX-C10FP (17.14 mb)
Kameras - SMX-C10GP (17.14 mb)