Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The power automatically turns off. Power cannot be turned off . The battery is quickly discharged. You should check the resolution before .. pages 43-44 A warning indicator or message appears .. pages 79-80 • Ambient light is too bright. Displays English_81 troubleshooting Storage media Recording Symptom Explanation/Solution Memory card functions are not operable. Image cannot be deleted. You cannot format the memory card. The data file name is not indicated correctly. Symptom Explanation/Solution Pressing the Recording start/stop ( ) button does not start recording. The actual recording time the estimated time. Insert a memory card into your camcorder properly. .. page 27 If you use a memory card formatted on a computer, format it again directly on your camcorder. .. page 57 You cannot delete the images protected by another device. Release the protection of the image on the device. .. page 50 Release the lock on the write-protect tab of the memory card (SDHC memory card, etc.), if any. .. page 28 Release the lock on the write-protect tab of the memory card (SDHC memory etc.), if any. .. page 28 Copy all important recorded files to your PC before formatting. Samsung shall not be responsible for any loss of data. (It is recommended copy the data to your PC or other storage media. ) The file may be corrupted. The file format is not supported by your camcorder. Only the file name is displayed, if the directory structure does international standard. There is not enough free space to record on Make sure the memory card is inserted The internal temperature of your camcorder Turn off your camcorder and leave Your camcorder is damp and moist . Turn off your camcorder and The estimated recording time Recording a fast-moving of storage space required recording time. 82_ English There is no more free space for recording on the storage media. Back up important files on your PC and format the storage media or delete the unnecessary files. If you use a memory card with a low writing speed, the camcorder automatically stops recording the videos and the corresponding message appears on the LCD screen. Symptom Explanation/Solution The recording stops automatically. When recording a subject illuminated by bright light, vertical lines appear. The camcorder is unable to record these levels of brightness. • When the screen is exposed to direct sunlight during recording, the screen turns red or black for an instant. Do not leave the camcorder with the LCD screen exposed to direct sunlight. • During recording, the date/time does not display. "Date/Time Set" is set to off. Set the "Date/Time Set" to on. .. page 25• The beep sound is not heard. Set the "Beep Sound" to "On." .. page 58 The beep sound is temporally off while recording videos. When the component/AV cable jack is connected to the camcorder, the sound will automatically turn off. ••• There is a time difference between the point where you press Recording start/stop ( ) button and the point where the recorded video starts/stops. On your camcorder, there may be a slight time delay between the you press Recording start/stop ( ) button and the actual point where the recorded video starts/stops. This is not an error. • The recording stops. The internal temperature of your camcorder is unusually camcorder and leave it for a while in a cool place. Your camcorder is damp and moist inside (condensation). camcorder and leave it for about 1 hour in a cool •• You cannot record a photo Set your camcorder to Record mode. .. page 19 Release the lock on the write-protection tab The storage media is full. Use a new memory media. .. page 57 Or remove unnecessary images. .. page 49 ••• The digital zoom function is not When the video resolution is set function is not available. Choose another video resolution. •• English_83 troubleshooting Adjusting the image during recording Symptom Explanation/Solution It is out of focus. This camcorder has no user-adjustable focus control function. The minimum focal length between the camcorder and the subject is 1.3m. •• The image appears too bright or flickering, or changes in colour. This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel "iSCENE" to minimise these phenomena. .. page 42 • Playback on your camcorder Symptom Explanation/Solution Pressing the playback (play/pause) button did not start playing. Press the Mode ( ) button to set the Play mode. Image files recorded on another camcorder may not play on your camcorder. Check out the memory card compatibility. .. page 28 ••• The skip or search function does not work properly. If the temperature inside the camcorder is too high, it cannot function properly. Turn the camcorder off, wait for a few moments, and turn it on again. • Playback is interrupted unexpectedly. Check if the AC power adaptor is properly connected and stable. • You cannot hear sound when playing a Time Lapse recording. The Time Lapse REC function does not support sound. • Photos stored ...
Dieses Handbuch ist für folgende Modelle:Kameras - HMX-U100BP (5.01 mb)
Kameras - HMX-U100RP (5.01 mb)
Kameras - HMX-U100SP (5.01 mb)
Kameras - HMX-U100UP (5.01 mb)