Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 Gently push the [Battery release (BATT.)] switch in the direction • Make sure that the SAMSUNG logo on the battery is facing you shown in the figure to eject the battery. when the camcorder is placed as shown in the figure. 2 Push down, and then lift the battery out in the direction shown in the figure. [Battery release (BATT.)] switch • Use only Samsung-approved batteries. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion. • Samsung is not responsible for the problems caused by unapproved batteries. • Remove the battery from the camcorder when the camcorder is not in use. • We recommend you purchase one or more additional batteries to allow continuous use of your camcorder. 20 Getting started CHARGING THE BATTERY You can charge the battery with the USB cable and power adaptor. Make sure that you use the supplied USB cable or power adapter to charge the battery. If you use any other power adapter for the camcorder, it will not work properly or the battery may not be charged. It may also cause electric shock or result in fire. 1 Insert the battery into the camcorder. ..page 19 2 Open the jack cover of the camcorder. 3 Charge the battery using the USB cable and power adaptor. The CHG (charge) indicator lights up and charging starts. When the battery is fully charged, the charging (CHG) indicator turns green. ..page 21 Charging the battery at low temperature may take longer or the battery may not charge fully (green indicator will not turn on). Make sure that there are no foreign substances on the plug or in the socket when you connect the power adaptor to the camcorder. When using the power adaptor, place it close to the wall outlet. If you experience a malfunction while using the camcorder, separate the power adaptor immediately from the wall outlet. Do not use the power adaptor in a tight space, such as between furnishings. Make sure to turn off the camcorder before disconnecting the power adaptor. Otherwise, you can damage the storage media or data. • • • • • When recording indoors with a wall outlet available, it is convenient to use the power adaptor instead of the battery. We recommend you charge the battery in a place with an ambient temperature between 10°C and 30°C (50.F~86.F). If the camcorder is turned on, the battery will still charge, but more charging time will be needed. We recommend you keep the camcorder turned off while it charges. You cannot operate the camcorder using USB power only. Use the power adaptor or battery to power the camcorder. If you use the camcorder while you are charging the battery, charging may take longer. An AC plug adaptor is required in some foreign countries. If you need one, purchase it from your distributor. • • • • • • • To charge the battery with the power adaptor CARD To charge the battery by connecting to a PC CARD Getting started CHECKING THE BATTERY STATE Battery level display The battery level display shows the amount of battery power remaining in the battery. To check the charging state You can check the charging state and remaining battery capacity. The colour of the CHG lamp indicates the charging state. CARD Charging (CHG) lamp Charging state LED colour Charging Fully charged Error (Orange blink) (Orange) (Green) [220Min]STBY 9999 Battery Level Indicator State Message Fully charged - 75%~50% - 50%~25% - 25%~5% - less than 5% - Exhausted (flickers): The device will soon turn off. Change the battery as soon as possible. - -The device will be forced to turn off after 3 seconds. Low battery The figures above are based on a fully charged battery at normal temperature. Low ambient temperature may affect the use time. Getting started Available charging and running time for the battery Battery Type IA-BP105R IA-BP210R Charging time To charge the battery with the power adaptor approx. 160 min. approx. 300 min. To charge the battery by connecting to a PC approx. 160 min. approx. 300 min. Resolution HD SD HD SD Continuous recording time approx. 100 min. approx. 80 min. approx. 200 min. approx. 160 min. Playback time approx. 200 min. approx. 400 min. • Charging time: Approximate time in minutes required to fully charge a completely exhausted battery. • Recording/Playback time: Approximate time available when you have fully charged the battery. • The time is only for reference. Times shown above are measured under Samsung’s test conditions. Your times may differ, depending on your usage and conditions. • The recording and playback times will be shorter when you use your camcorder in low temperatures. • We recommend using the power adaptor when using the Time Lapse REC function. Continuous Recording (without zoom) The continuous recording time shows the available recording time when you record without using any other function after recording starts. The battery may discharge 1.5 times faster than this reference if you use the record start/stop, the zoom, and the playback functions. Prepare additional batter...
Dieses Handbuch ist für folgende Modelle:Kameras - HMX-F800BP (6.33 mb)
Kameras - HMX-F80BP (6.33 mb)
Kameras - HMX-F80SP (6.33 mb)
Kameras - HMX-F810BP (6.33 mb)