Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
When you transfer the camcorder, it is recommended that you perform [ EMPTY] (p. 63) to prevent the recovery of your data. Also, when you dispose of the camcorder, it is recommended that you destroy the actual body of the camcorder. If you cannot record/play back images, perform [MEDIA FORMAT] . If you repeat recording/deleting images for a long time, fragmentation of data occurs on the recording media. Images cannot be saved or recorded. In such a case, save your images on some type of external media first (p. 53, see Operating Guide too), and then perform [MEDIA FORMAT] (p. 62). Carl Zeiss lens Your camcorder is equipped with a Carl Zeiss lens, which was developed jointly by Carl Zeiss, in Germany, and Sony Corporation, and produces superior images. It adopts the MTF measurement system for video cameras and offers a quality typical of a Carl Zeiss lens. MTF= Modulation Transfer Function. The number value indicates the amount of light from a subject coming into the lens. Table of Useful Techniques Index (button) (button) (button) 1 Table of Useful Techniques Index Getting started Step 1: Charging the battery pack You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder. You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder. 1 Turn off your camcorder by closing the LCD screen. 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). Be sure that the . mark on the DC plug is facing down. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. 4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder. See page Table of Useful Techniques Index Getting started Step 1: Charging the battery pack You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder. You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder. 1 Turn off your camcorder by closing the LCD screen. 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). Be sure that the . mark on the DC plug is facing down. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. 4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder. See page 93 on recording and playing time. When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen. . . . . Battery pack DC IN jack DC plug AC Adaptor Power cord (Mains lead) CHG (charge) lamp To the wall outlet (wall socket) ACCESS lamp (Hard disk) (button) (button) (button) 1 Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. DCR-SR37E/SR38E/SR47E/SR48E/SR57E/SR67E Battery pack Charging time NP-FH30 (supplied) 115 NP-FH50 135 NP-FH70 170 NP-FH100 390 DCR-SR77E/SR87E Battery pack Charging time NP-FH50 (supplied) 135 NP-FH70 170 NP-FH100 390 When the battery pack is charged at 25 .C (77 .F) (10 .C to 30 .C (50 .F to 86 .F) is recommended) To remove the battery pack Close the LCD screen. Slide the BATT (battery) release lever . and remove the battery pack .. . To use a wall outlet (wall socket) as a power source Make the same connections as “Step 1: Charging the battery pack.” Even if the battery pack is attached, the battery pack is not discharged. Charging the battery pack abroad You can charge the battery pack in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range. . Do not use an electronic voltage transformer. Notes on the battery pack . When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure that the (Movie) lamp/ (Photo) lamp (p. 19)/ACCESS lamp (p. 16)/access lamp (p. 60) are turned off. . The CHG (charge) lamp flashes during charging under the following conditions: .The battery pack is not attached correctly. .The battery pack is damaged. . In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 5 minutes, to save battery power ([A.SHUT OFF]). Table of Useful Techniques Index (button) (button) (button) 17 Notes on the AC Adaptor . Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. . Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. . Do not short-circuit the DC plug of the AC Adaptor or battery te...
Dieses Handbuch ist für folgende Modelle:Kameras - DCR-SR47E (3.09 mb)
Kameras - DCR-SR48E (3.09 mb)
Kameras - DCR-SR57E (3.09 mb)
Kameras - DCR-SR67E (3.09 mb)