Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Panasonic Dateigröße: 2.39 mb Dateiname: AGDTL1P.PDF Unterrichtssprache:

This command is not acknowledged while a search control command is being processed. [STX] DBW [ETX] [STX] DBW [ETX] Sets white as the color of the characters displayed on the monitor screen. This command is not acknowledged while a search control command is being processed. [STX] DDS:d:t:m:r [ETX] Parameter d = N or F (date) t = N or F (time) m = N or F (recording time mode) r= N or F (REC/ALARM) N: ON (displayed) F: OFF (not displayed) [STX] DDS [ETX] Sets the display items on the monitor screen. This command is not acknowledged while a search control command is being processed. [STX] DFC:m [ETX] Parameter m = C: (COUNT) counter display 1: (TIME) clock display M: (CAMERA) camera number display P: (PASS) pass display [STX] DFC [ETX] Sets the display mode of the display tube. This command is not acknowledged while a search control command is being processed. [STX] DMS:d:m:n [ETX] Parameter d = T (fixed) m = M: AM/PM display H: 24-hour display n= 0—9: VTRIDNo. This unit does not have a function for displaying the VTR ID No. so any number between 0 and 9 may be sent. [STX] DMS [ETX] Sets the time display mode (12-hour or 24-hour system). This command is not acknowledged while a search control command is being processed. [STX] DPPimm [ETX] Parameter mm = C: Center LB: Bottom left LT: Top left RB: Bottom right RT: Top right [STX] DPP [ETX] Sets the position where the characters are to be displayed on the monitor screen. This command is not acknowledged while a search control command is being processed. 66 RS-232C ■ Media operation control commands Data transmitted by PC Data returned from unit in response Description of command [STX] HEA [ETX] [STX] HEA [ETX] Sets the operation that is to take place when the EJECT button is pressed to REW + EJECT {tape is ejected after it has been rewound to its start position). This command is not acknowledged while a search control command is being processed. [STX] HEE [ETX] [STX] HEE [ETX] Sets the operation that is to take place when the EJECT button is pressed to EJECT. This command is not acknowledged while a search control command is being processed. [STX] HRE:m [ETX] Parameter m = B: BUZZER E: EJECT P: REPEAT R: REWIND S: STOP [STX] HRE [ETX] Sets the unit’s operation mode that is to be established when the tape-end is reached during recording. This command is not acknowledged while a search control command is being processed. [STX] HRL:m [ETX] Parameter m = F: Recording enabled N: Recording disabled [STX] HRL[ETX] Sets the lock mode for operation during recording. [STX] HTI:m [ETX] Parameter m= A: REWIND*REC R: REC S: STOP [STX] HTI [ETX] Sets the unit’s operation mode that is to be established when the tape has been inserted. This command is not acknowledged while a search control command is being processed. [STX] HTR:m:b [ETX] Parameter m = 0: 2% of tape remaining 1: 10% of tape remaining 2: 20% of tape remaining 3: 30% of tape remaining F: (OFF) no warning b = N: Warning is sounded by buzzer. F: (OFF) warning is not sounded by buzzer. [STX] HTR [ETX] Sets the remaining tape amount for which REMAIN is to flash on the display tube as a warning display, and sets the buzzer to sound when the tape-end position is about to be reached. (When a 120-minute tape is used) 67 RS-232C ■ Operation control commands Data transmitted by PC Data returned from unit in response Description of command (STX] OAC [ETX] [STX] OAC [ETX] Releases the alarm signal input. [STX] OAF [ETX] [STX] OAF [ETX] Advances the tape frame by frame in the forward direction. [STX] OAI:n [ETX] Parameter n= 1: ALARM IN 1 2: ALARM IN 2 No parameter: ALARM IN 1 [STX] OAI [ETX] Inputs the alarm signal. [STX] OAR [ETX] [STX] OAR [ETX] Advances the tape frame by frame in the reverse direction. [STX] OEJ [ETX] [STX] OEJ [ETX] Ejects the cassette tape. [STX] OFF [ETX] [STX] OFF [ETX] Fast forwards the tape. [STX] OPA [ETX] [STX] OPA [ETX] Sets the unit to the pause mode (R EC PAUSE or PLAY PAUSE) or pause release mode (REC or PLAY). [STX] OPL [ETX] [STX] OPL [ETX] Plays back the tape. [STX] OPR [ETX] [STX] OPR [ETX] Plays back the tape in the reverse direction. [STX] ORC [ETX] [STX] ORC [ETX] Sets the unit to the recording mode. When the unit is set to REC INHIBIT, error code ERE is returned from the unit. [STX] ORR [ETX] [STX] ORR [ETX] Performs REC REVIEW. [STX] ORW [ETX] [STX] ORW [ETX] Rewinds the tape. [STX] OSF:n [ETX] Parameter n = 1: 1 x normal speed 4: 4x normal speed 7: 7x normal speed [STX] OSF [ETX] Sets the tape playback speed in the forward direction. [STX] OSP [ETX] [STX] OSP [ETX] Sets the unit to the stop mode. [STX] OSR:n [ETX] Parameter n= 1: 1 x normal speed 4: 4 x normal speed 7: 7x normal speed [STX] OSR [ETX] Sets the tape playback speed in the reverse direction. Refer to the RS-232C mode transition table (page 101 ) for the conditions under which the operation control commands are a...

Herunterladen

Geben Sie zwei Ziffern: