Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. 1 is the safety information. Contents For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Controls and their Functions _Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 _Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 How To Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Appearance and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Outline . This unit is able to separate multiple data (camera control data and swivel stand control data) transmitted from the camera controller (AK-HRP900P), and to output the control information to the multi-purpose camera (AK-HC900P) and the swivel stand (AWPH300A, etc.). . The distance between this unit and the camera is 33 ft (10m) max. Precautions for Use . We recommend that the AC adapter AW-PS505P is used for power supply. . Handle the unit with care. If dropped or given a strong shock, it may cause a trouble or accident. . Use the unit in a temperature range of 32oF to 104oF (0oC to + 40oC). If used at a temperature below 32oF or higher than 104oF, it may cause bad influences to the component parts. . Turn off the power before connecting or disconnecting the cable. When connecting or disconnecting the cable, be sure to turn off the power switch of the unit beforehand. . Avoid using the unit outdoors. . Install the unit 3.3 ft (1 m) away from the monitor. . Maintenance Pull out the power cord plug and clean the unit with dry cloth. If it is hard to clean, moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightly wipe the unit. Precautions . Do not use volatile solvents such as benzene or thinner. . When using a chemical mop, carefully read the instructions. Controls and their Functions _Front panel POWER OFF ON Interface Adapter 1 2 1 Power indication LED [POWER] When the power control switch 2 is ON, it is lighted green. With the power control switch 2 set to OFF, it goes out. 2 Power control switch [POWER ON/OFF] When this switch is set to ON, this unit and the camera connected to it are turned on. With the switch set to OFF, both of the unit and the camera are tuned off. Controls and their Functions _Rear panel CAMERA CN DATA IN BEAKER DC 12V IN PAN/TILT CONTROL OUT 3 4 5 76 3 Camera connector [CAMERA I/F] Connected to the camera (AK-HC900P) with the attached multi-cable. 17234568910111213141517 23456 89101112131415 Pin No Signal Pin No Signal 1 NC 8 NC 2 NC 9 NC 3 NC 10 NC 4 NC 11 NC 5 DC 12V 12 DC GND 6 Frame GND 13 TXD (C) 7 TXD (H) 14 RXD (H) 15 RXD (C) TXD: Data from camera to remote controller. RXD: Data from remote controller to camera. 4 Swivel stand control signal output connector [PAN/TILT CONTROL OUT] Connected to the swivel stand. 5 Control data input connector [DATA IN] Used to input the data multiplexed by the camera controller (AK-HRP900P). 17 23456 89101112131415 Pin No Signal Pin No Signal 1 NC 8 NC 2 NC 9 NC 3 NC 10 NC 4 NC 11 NC 5 NC 12 NC 6 Frame GND 13 TXD (C) 7 TXD (H) 14 RXD (H) 15 RXD (C) Controls and their Functions 6 Breaker [BREAKER] DC power breaker. The breaker operates to cut off the power in case of over-current. 7 DC12V input connector [DC 12V IN] (XLR4-pin) Connects the AC adapter. We recommend that the AW-PS505P (option) is used. 1 2 3 4 Pin No Signal 1 GND 2, 3 ––– 4 12V How To Connect 7 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F G/L I N Pb OUT Pr /SDI OUT Y/VIDEO OUT 1394 CONTROL IN IP/RP DC12V IN LENSE I/F CAMERA I/F ND/EXT SDI IN C S OP O I O I POWER ON OFF SD CARD OPERATE ALARM SCENE MODE PRE CAM BAR TEST USER1 USER2 Camera Controller TALLY MENU ON MENU SPEED ZOOM TELE WIDE FAR NEAR FOCUS 1 2 3 4 5 PRESET CC FLTER 3200 4300 6300 CROSS ND FLTER 1 1 / 4 1/16 1/32 SHUTTER OFF STEP SYNCRO GAIN 0 S1 S2 S3 9dB 18dB AUTO WHITE BLACK GAIN BLACK AUTO M-PED CHECK IRIS Interface adapter AK-HTF900P . Make the connections with all the units turned off. . We recommend that the AW-PS505P (option) is used as AC adapter . Use a swivel stand, AW-PH300A, AW-PH500, AW-PH600, and an adapter suited for the swivel stand. Remote (zoom/focus control) cable Swivel stand controller AW-RP301 Swivel stand AW-PH300A Multi-purpose digital camera AK-HC900P Multi-cable (17 ft) AK-HDMLTCA05 Camera controller AK-HRP900P HD monitor AC adapter AW-PS505P DDC power cable HD-SDI ...