Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Panasonic Dateigröße: 1.75 mb Dateiname: AJHD1700.PDF Unterrichtssprache:

A total of 60 cue points on up to 10 pages can be registered. 132 ROTA MODE For selecting whether to perform the registration operation if all the cue points have already been registered when the multi cue function has been set to ON. 0000 OFF: No further cue points are registered. 0001 ON: The registration operation is continued. If “MANU” has been selected as the setup menu item No.131 (PAGE MODE) setting, the next cue point is registered at CUE.1 on the page concerned; if “AUTO” has been selected, it is registered at CUE01. 133 For setting the volume of the sound heard when the keys are touched. KEY BEEP 0000 OFF 0001 LOW 0002 HIGH 134 ALARM BEEP For setting the volume of the alarm tone. 0000 OFF 0001 LOW 0002 HIGH If the fan motor has shut down, the alarm tone is sounded at the HIGH volume level regardless of this setting. No./Item Description of setting 140*1 For selecting the output signals. 0000 EE: OUTPUT : The input signals selected by setup menu items No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to No.724 (D IN SEL 78) are output. : The input signals selected by setup menu items No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to No.724 (D IN SEL 78) are output: 0001 TAPE: The signals played back from the tape are output. : The simultaneous playback signals are output. In order to select the output signals during recording or editing, set setup menu item No.302 (CONFI EDIT). 141*1 For setting what is to be controlled by the audio volume controls on the front panel. VOLUME 0000 REC: The controls function as REC volume controls. 0001 PB: The controls function as PB volume controls. 0002 AUTO: Normally, the controls function as PB volume controls. However, during recording or in the EE/INPUT CHECK status, they automatically function as REC volume controls. 142*1 For selecting the conditions under which the AUDIO UNITY lamp on the front panel is to light. AUDIO UNITY 0000 IN: The lamp lights when all the audio input levels are set to the UNITY level. 0001 OUT: The lamp lights when all the audio output levels are set to the UNITY level. 0002 IN/OUT: The lamp lights when all the audio input and output levels are set to the UNITY level. 143 For setting whether the lighting of the tape mechanism is to be set to ON or remain OFF. CASSTT 0000 OFF: LIGHT The mechanism does not light even when a cassette is inserted. 0001 ON: The mechanism lights when a cassette is inserted. 144 For switching the preset registration method for the time code. TC INPUT 0000 NORMAL: The time code is input starting with the left- most digit. 0001 REV: The time code is input from the high-order digit but is displayed from the right-most digit. 145 For selecting whether the LCD monitor display on the front panel is to be turned on or off. FRONT LCD 0000 OFF: The display is turned off. 0001 ON: The display is turned on or off in synchronization with the screen saver operation for the time code display area. *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. The underlining (__) denotes the factory setting mode. Setup menus No./Item Description of setting 200 PARA RUN For selecting whether to operate two or more VTRs in synchronization. 0000 DIS: The VTRs are not operated in synchronization. 0001 ENA: The VTRs are operated in synchronization. To operate the VTRs in synchronization, set all the VTRs to 1 (ENA). (Refer to pages 14 and 19.) 202 ID SEL For setting what ID information is to be returned to the controller. 0000 OTHER 0001 DVCPRO 0002 ORIG • For 0 (OTHER), the ID information of VTRs other than DVCPRO models is set. • Select 2 (ORIG) only when the VTR is connected to a Panasonic controller (such as the AJ-A900, an optional accessory). • Select 1 (DVCPRO) or 2 (ORIG) if the 23/24 Hz mode has been selected by system menu item No.25 (SYSTEM FREQ). 204 For selecting whether the RS-232C connector is to function. RS232C SEL 0000 OFF: The RS-232C connector does not function. 0001 ON: The RS-232C connector functions. 205 BAUD RATE For setting the RS-232C data transfer speed (baud rate). 0000 300 0001 600 0002 1200 0003 2400 0004 4800 0005 9600 206 DATA LENGTH For setting the RS-232C data length. (Unit: bits) 0000 7 0001 8 207 STOP BIT For setting the number of RS-232C stop bits. (Unit: bits) 0000 1 0001 2 208 PARITY For setting whether the RS-232C parity bit is to be used and, if it is used, whether even or odd parity is to apply. 0000 NON: The parity bit is not used. 0001 ODD: The parity bit is used with an odd parity. 0002 EVEN: The parity bit is used with an even parity. No./Item Description of setting 209 RETURN ACK For setting whether or not to return the ACK code when a command is received from RS232C. 0000 OFF: The ACK code is not returned. 0001 ON: The ACK code is returned. 212 For selecting the remote...

Herunterladen

Geben Sie zwei Ziffern: