Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Press UP A or DOWN ▼ to select TITLE 2 3 4 5 6 Note: MENU PAGE 1/2 PROGRAMMED REC TO : PHRASE TALLY LAMP ; ON STAND-BY RELEASE ; OFF CLOCK SET ▼ SELECT: PUSH T/A KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY Press DISPLAY to select PHRASE. Press MENU to exit. In Pause (Record mode), press TITLE repeatedly to display phrases from list below, left. To record the phrases, Press RECORD/PAUSE. Press TITLE while recording to remove phrasé. • To redisplay phrase, press TITLE in Pause (Record mode). 40 For assistance, call 1-800-211-PANA(7262) Viewfinder/LCD Monitor Indications Tape remaining and battery charge level can be displayed. 1 Set POWER to CAMERA. Press DISPLAY repeatedly to select the following displays. Battery Remaining: FULL EMPTY Tape Remaining: □ -(No tape) БЭ Fourth press ■ Second ▼ press ■ " й ra :i—v- s ^ / I \ 4 Ы1 FULL Third press * Tape remaining indicator operates a few EMPTY seconds after tape starts moving. Recording the Date and Time 1 Do steps 1 and 2 above to select time/ date, date only, or no display. 2 Start a recording (page 19). • Only the Date and/or Time are recorded. Display-Off Mode No Indication, except Intelligent Titler (pages 38-40), will be displayed. 1 Press MENU for MENU mode. Press UP A or DOWN ▼ to select DISPLAY Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. Press DISPLAY to select OFF. Press MENU to exit. 3 Press DISPLAY repeatedly to remove time/date. Indications are restored when Camcorder is turned off, and then on again. SECURITY ; OFF VIDEO EFFECTS ; FADE BLACK SELECT SET ENO PUSH VIA KEY PUSH OtSWJkY KEY PUSH MENU KEY CAMERA MODE SELECT: PUSH T/A KEY SET ; PUSH DISPLAY KEY END : PUSH MENU KEY VCR MODE 41 Viewfinder/LCD Monitor Indications CAMERA/VCR mode 1 2 > 2 i ËTsI D .ZOOM I H/10QQQI ШШ- IMFIOI CHECK TAPE 12:00 JAN :00 AML 1 2000I fF A D Ё ICJSHR RED 1 Battery Remaining-'CIZZ3'- (page 41) “WARNING LOW BATTERY” appears and Power Lamp starts flashing 15 seconds before Camcorder shutoff. 2 Tape Remaining • If RECORD/PAUSE is pressed with no cassette, or cassette has no record tab in Camera (RECORD) mode, “53” flashes 1 minute and “CHECK TAPE" appears 5 seconds. • If PLAY. FF or REW is pressed with no cassette inserted in VCR mode,“S3” flashes 1 minute and “CHECK TAPE” appears 5 seconds. • As end of tape is reached, “SI” flashes and “TAPE END” appears 5 seconds. 3 10-Second Reminder Each time a recording is started, a 10 second incremental display (up to 59:50) lets you monitor how long one scene is recorded. 0:00 0:10 0:20 ..... 59:50 _I (return to 0:00 and continue) 4 TAPE SPEED (pages 12,19) (SP=standard play, SLP=super long play). 5 Operating Mode REC (record) PAUSE FF (fast forward) PLAY REW (rewind) 42 For assistance, call 1-800-211-PANA(7262) Viewfinder/LCD Monitor Indications CAMERA/VCR mode 1 2 3 4, 5,6 I150x E I S D. ZOO Ml nE3iiit±iiMa Loi2oj_sra 11/10000] fFTE^I r iMFIQh VCR-MODE FADE 1 2:00 :00AML JAN 1 2 0 Pol SHR RED 8 9 10 11 12 1 Zoom Magnification level (page 29). 2 Digital E.I.S. (page 36). 3 Digital Zoom (page 35). 4 VCR-MODE Appears 1 minute when POWER is set to VCR or if RECORD/PAUSE is pressed in VCR mode. 5 DEW If moisture condensation occurs in unit, “WARNING DEW DETECTED” appears, Power Lamp flashes, and Camcorder will shutoff in 15 seconds. Wait until lamp no longer flashes when Camcorder is turned on to use. 6 Security Mode (page 37). 7 Date and Time (page 18). 8 Backlight (page 29). 9 Manual Focus (page 30). 10 High Speed Shutter (page 31). 11 Fade (page 33). 12 Color Digital Fade (page 34). 43 Operation Notes Attaching Optional Filters and Lenses When you remove the Lens Hood, pinch the Lens Hood and turn it counterclockwise as illustrated at right. Then attach an optional filter or lens. • Be careful not to touch the lens itself. • Replace the Lens Hood after removing the accessory. Lens Hood Area Operation Caution With a Wide or Telephoto conversion lens (optional) attached, the four corners of the screen may darken when zoom is set to maximum wide angle. When attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after a filter (optional) has been attached, the four corners of the screen may darken when zoom is set to maximum wide angle. With two filters (optional) attached, the four corners of the screen may darken when zoom is set to maximum wide angle. Cleaning EVF (Electronic Viewfinder) To Remove 1 © Remove the screw with a Phillips screwdriver. Turn counterclockwise. ©Turn the EVF Eyepiece. © Pull the EVF Eyepiece. Remove any lint or dust particles with a soft clean cloth being careful not to scratch the glass surfaces. Replace the EVF Eyepiece and the screw. 44 For assistance, call 1 -800-211 -PANA(7262) Replacing Clock Battery The clock battery is pre-installed. Follow the steps below if replacemen...