Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Still/Strobe/Wide • MotionSensor • Digital Wipe Mode • Picture in Picture Wipe Title Before you begin... • Connect Camcorder to power source. • Insert the Memory Card (page 34). 1 Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle. 2 Set POWER to PHOTO. • Be sure POWER is fully rotated to PHOTO position. 3 Press MENU for REC MODE menu. Press UP or DOWN to select NORMAL or FINE (page 48). Then, press DISPLAY to set. 4 Press RECORD/PAUSE to capture image. • As the image is processed, the status screens below appear. The next image may be captured after “COMPLETED” disappears. • Depending on the image taken, the image page remaining indication may not change, or it may be decreased by 2 images. • For sharper images, set electronic shutter to higher speed when shooting in bright conditions, such as outdoors. WARNING: Do not, under any circumstances, remove the card immediately after pressing the RECORD/PAUSE (during recording of an image) or while deleting. This could damage the format of the card and make it unusable. Special Features 35 Digital Still Camera Digital Still Camera Before you begin... • Connect Camcorder to power source. • Insert the Memory Card (page 34). • Set POWER to PHOTO. 1 LIGHT 2, 3, 4 Note: • If Memory Card is not inserted, “NO CARD” appears on-screen. Set Power to OFF, then insert the Memory Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If “INCOMPATIBLE IMAGE” appears on- screen, the size of the captured image cannot be played back on this Camcorder. • Do not change POWER setting to CAMERA or change recording mode while “PLEASE WAIT” is displayed. • If “CARD ERROR” appears on-screen, see page 56. Using the Light For capture of still images in dim lighting. Set LIGHT to AUTO. When RECORD/PAUSE is pressed to capture an image in dim lighting, the Light comes on for about 2 seconds, the image is captured, then the light goes out. Or, set LIGHT to ON/OFF manually. (See page 16 for further details.) Playback 1 Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle. 2 Press (PLAY) to play mode. The Multi Image Playback screen appears. The last captured image screen is underlined. • If there are no recordings on the card, “NO PICTURE” appears on-screen. • In NORMAL or FINE mode, the color of the Multi Image page number is as follows: NORMAL mode green FINE mode white 3 Press + (FF) next. Press – (REW) previous. • The selected image will be underlined in green. • Continue pressing + (FF) or – (REW) for next or previous page. 4 Press (PLAY) to display image. This screen appears followed by image. • Press DISPLAY to remove or redisplay this screen. • Press (STOP) to redisplay Multi Image playback screen. 36 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Digital Still Camera Digital Still Camera Displayed Directory/Image Number 1, 2 Before you begin... • Connect Camcorder to power source. • Insert the Memory Card (page 34). • Set POWER to PHOTO. 1 Repeat steps 1 and 2 on page 36 to display Multi Image Playback screen. Select any image and press (PLAY). 2 Press MENU for DCF NUMBER DISPLAY menu. Press UP or DOWN to select ON or OFF. Then, press DISPLAY to set. ON . Directory/Image Number is displayed. OFF. Directory/Image Number is not displayed. Directory/Image Number Note: • Directory/Image Number “xxx-xxxx” (x indicates the number) is assigned automatically. • Even if ON is set, if the Directory/Image Number does not correspond with DCF it is not displayed. • The Directory/Image Number becomes the folder and file name when viewed with card reader. • This product is compliant with DCF (Design rule for Camera File System). Images saved on the Memory Card using other Digital Still Cameras that are compliant with DCF can be viewed on this product. Special Features 37 Digital Still Camera Digital Still Camera Delete Specific Images Before you begin... • Connect Camcorder to power source. You can delete unwanted images and • Insert the Memory Card (page 34). • Set POWER to PHOTO. increase the remaining image memory. Press (PLAY) to play mode. Important : Once deleted, images cannot be restored. DELETE PAGE: Deleting Specific Image Pages. DELETE ALL : Deleting All Image Pages. FORMAT : Format the Memory Card. 1 1, 2, 3 Note: • Pictures captured with other brand products cannot be used with this Camcorder. • If “CARD ERROR” appears on-screen, see page 56. WARNING : Do not, under any circumstances, remove the card immediately after pressing the RECORD/PAUSE (during recording of an image) or while deleting. This could damage the format of the card and make it unusable. Deleting Specific Image Pages 1 Press M-DEL for DELETE menu. Press UP or DOWN to select PAGE . • To exit menu at any time, press STOP. 2 Press M-DEL for Multi Image screen. Press + (FF) or - (REW) to select image page. Press M-DEL to set. 3 Press M-DEL to delete the page. • As image pages are deleted, pag...