Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
AC Adaptor (PV-DAC11) with AC Cable and DC Cable 1 pc. Battery Pack (CGR-D08/ CGR-D08R) 1 pc. A/V Cable (LSJA0280) 1 pc. USB Cable (K1HA05CD0001) 1 pc. Audio Adaptor (LSJP0829) 1 pc. Lens Cap (LSYF0518) with Lens Cap Strap (LSGQ0066) 1 pc. Shoulder Strap (LSFC0016) 1 pc. CD-ROM of Driver Software for Windows 98SE/Me/2000/XP and Macintosh; USB Device Driver for Windows 98SE/Me/2000/ XP; PHOTOVU/MPEG4 Movie Messenger™ System for Windows 98SE/Me/2000/XP; Built-in SD Drive for Macintosh (LSFT0491) Microsoft®, Windows® and Windows Media are registered trademarks of Microsoft in the United States and other countries. Macintosh, iMac, iBook, PowerBook, PowerMacintosh, Power Mac, and Mac are trademarks or registered trademarks of Apple Computer, Inc. Intel® Pentium® is a registered trademark. ¡.LINK is a trademark. PHOTOVU/MPEG4 Movie Messenger™ System is a registered trademark. IBM is a registered trademark of IBM Company. MultiMediaCard is a registered trademark, SD is a trademark. How to remove the Sensor tag Hand Strap Record Speed/Playback Time Use only those tapes having the “"Df logo indicating the 6.35 mm digital standard. aB Open the Hand Strap as illustrated W at left. Remove the Sensor tag. Then, replace the Hand Strap. Erase Protection Cassettes have a sliding record tab to ensure recordings are not accidentally erased. 1 To prevent accidental erasure: Slide the tab to the left (open). record tab To record again: Slide the tab to the right (close). For assistance, please call : 1 -600-211-PANA{7262) or send e-mail to: consumerproducts@panasonic.com Before Using Easy Cassette Eject/Insertion If the Palmcorder is connected to a power source, the cassette can be inserted and ejected without turning the Palmcorder on. 4pushto 2tape EJECT CLOSE LCD-OPEN Cassette Compartment Cover Before you begin- • Connect the Palmcorder to a power source, (pp. 13, 14) 1 2 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. Slide TAPE EJECT to open the ^ Cassette Compartment Cover. O Insert a cassette record tab up, ,I window side facing out. ^T Press PUSH TO CLOSE to close the Cassette Compartment Cover. • To remove the cassette... Slide TAPE EJECT to open the Cassette Compartment Cover and pull the cassette tape straight out. Note • When inserting the cassette, make sure it is facing the right direction and then push it in completely. Attaching the Shoulder Strap | Hand Strap 1 Undo the two strap ends from their buckles. Thread the strap ends through the Strap Attachment Rings. Reinsert the strap ends through their buckles. O t O Make sure the straps are not twisted. ffm Adjust the Length 1 Loosen the strap from the Buckle and create a loop. Pull the strap firmly through the Buckle to shorten or lengthen the strap. | Q Adjust the length of the Hand Strap to the size of your hand as illustrated. Hand Strap Lens Cap Attaching the Lens Cap Strap: Thread the Lens Cap Strap through the Strap Attachment Ring as shown. Attaching the Lens Cap Cord to the Hand Strap: Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Cord. Reattach the Hand Strap. Before Use Before Using Using the Built-in Light To brighten the natural colors in a scene. Before you begin- • Connect the Palmcorder to a power source, (pp. 13, 14) • Set POWER to CAMERA or M-CARD. 1 Hold down LIGHT for more than 0.7 seconds to turn ON or OFF. • ";D” will appear on the screen. 1 LIGHT Caution- This light becomes hot during operation. Make sure nothing covers the light during operation. Built-in Light Using Light reduces battery time. Provide adequate ventilation if using Light in a hot environment for a long time. Set LIGHT to OFF when not in use. When replacing Ihe bulb, see page 91. Remote Control (Optional) You can operate the major functions of your Palmcorder from up to approximately 5 m (16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and press the desired buttons (Remote Sensor is located under the lens). To operate Camera functions: Set POWER to CAMERA. To operate VCR functions: Set POWER to VCR. Remote Sensor Controlled Functions • Rec/Pause (p. 17) • Tele (Zoom) (p. 20) • Wide (Zoom) (p. 20) • Date/Time (p. 108) • Reset (p. 44) • PhotoShot (p. 19) • Display On TV (p. 38) • CounterrTime Code (p. 109) • Audio Dubbing (p. 43) • Record (p. 46) • Menu (p. 16) •Play (p. 31) FF/Search (p. 33) REW/Search (p. 33) Pause/Select (pp. 15, 16, 35) Stop/Set (pp. 15, 16, 31, 46) Slow/Frame Advance (Forward) (pp. 34, 35) Slow/Frame Advance (Backward) (pp. 34, 35) Index Search (Forward) (pp. 35, 36) Index Search (Backward) (pp. 35, 36) Speaker Volume (p. 32) 8 For assistance, please call: 1 -800-211 -PANA(7262)or send e-mail to : consumerproducts@panasonic.com * Before Using Replace the Battery Optional 1 2 3 Insert a slender pointed object, such as the ti...