Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
.Maximum number of recordable pictures that can be displayed is 99999. If the number of recordable pictures exceeds 99999, the number will not change when the picture is taken until the number of recordable pictures gets less than 99999. .The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a PC etc. VQT1Y00 Recording Recording (Basic) 4 Recording Recording (Basic) 4 Zoom in/out function The maximum optical zoom ratio is 16k. ¬Change the mode to . Digital zoom function / VOL If the zoom magnification exceeds 16k, then the digital zoom function will be activated. Select the menu. (l34) W T 1.WT1.W T 8.WTW T8. WTW T1616.16. Zoom lever T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) .The zoom speed varies depending on the range over which the zoom lever is moved. [RECORD SETUP] # [D.ZOOM] # desired setting [OFF]: Optical zoom only (Up to 16k) [40k]: Up to 40k [1000k]: Up to 1000k .The larger the digital zoom magnification, the more the image quality is degraded. .If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded. When returning the zoom lever to the original position, move it quietly. .When the zoom magnification is 16k, the subjects are focused at about 1.2 m (3.9 feet) or more. .When the zoom magnification is 1k, this unit can focus on a subject approx. 4 cm (1.6q) away from the lens. (Macro function) .The zoom speed does not vary when operating with the remote control. VQT1Y00 Recording Recording (Basic) 5 Recording Recording (Basic) 5 Optical image stabilizerfunction Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬Change the mode to . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. . appears on the screen. O.I.S.: Optical Image Stabilizer .This function’s default setting is on. .Set the Intelligent Auto mode to off before turning the Optical Image Stabilizer function to off. .In the following cases, the image stabilizer function may not work effectively. jWhen the unit is shaken greatly jWhen you record a moving subject while tracking it 58 VQT1Y00 Recording Recording (Basic) 6 Recording Recording (Basic) 6 AF tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬Change the . 1 Touch A Target frame . will be displayed on the screen. .The target frame will track the face framed in prioritized face framing (orange) when the Intelligent auto mode is set to (portrait). .Available target lock range will be displayed in red frame when the Intelligent auto mode is set to anything but (portrait). 2 Touch the object and lock the target. touched object is tracked. Selection becomes (portrait) when target frame is locked on a face. .When you t he object, the target locked and track .Touch o be changed again when arget. .When selected, the s g bec (normal) and 3 Start recording. .When you touch [RETURN], the tracking function will be canceled. . About target frame .When the button is pressed halfway, the focus is set to the object that is locked. The target frame turns green when it focuses, and the target cannot be changed. .When target lock fails, the target frame blinks in red and then disappears. In such cases, touch the object again and lock the target. .The frame out assist B is displayed when the target frame gets close to framing out. .This function cannot be used in Manual mode. .It may track different objects or may not lock the target depending on the recording conditions such as the following: jWhen the object is too large or too small jWhen color of the object is similar to the background jWhen using zoom jWhen the camera is shaking jWhen more than one object overlaps jWhen the scene is dark jWhen the subject moves quickly .A message will be displayed when an object becomes unable to be tracked half-way through. In such cases, touch the object one more time. .AF tracking will be canceled in the following cases. jWhen the mode is changed jWhen the power is turned off jWhen the Scene mode is set jWhen the Intelligent auto mode is set to on/off .After setting [DISPLAY] to [OFF] if no operation is performed for about 3 seconds, the operation icon disappears. Touch the screen to display the icon again. When the AF tracking is used, the icon does not disappear. VQT1Y00 Recording Recording (Basic) 7 Recording Recording (Basic) 7 Recording with the video light The video light enables brightening of the images taken in a dimly-lit place. ¬Change the mode to . LIGHT LIGHT button Each time the LIGHT button is pressed, the indication changes by one setting in the following order. # / # Setting canceled : Video light on / : Auto video light on/off .This function’s de...