Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
utes to prevent damage to the Y BB]. MENU 2 REW F.FWDSTOP/EJECT IR POWER VCR/TV CST.IN TIMER RECORD RECORDMENUCHANNEL PLAY STANDBY-ON VCR/TVEJECT CHANNEL PAUSE /STILL C.RESET EXIT SEARCH -MODE SLOW DISPLAYSPEED STOP PLAY RECORD MENU REW F.FWD 1 2 3 4 5 6 7 8 0 9 5 6 6 5 42 2 3 4 REW F.FWDSTOP/EJECT IR POWER VCR/TV CST.IN TIMER RECORD RECORDMENU PLAY 1 22 33 4 11 5. Playback 7. Other Operations 1 11 2 22 TV ScreenRemote Control POWER VCR/TV CST.IN PLAY PLAY 3 33 STOP EJECT EJECT S- M E N U TOP PLAY TIMER PROGRAMMING AUTO REPEAT [OFF] B CHANNEL SET UP CLOCK SET LANGUAGE SELECT or 3 33 To decide CHANNEL SET UP AUTO SET UP F.FWD B MANUAL SET UP 4 44 To exit the menu C.RESET EXIT MENU or • If you have connected this unit to a cable box or satellite box, refer to “Hint for Cable Box or Satellite Box” section on page 1. - 5 STANDBY-ON VCR/TVEJECT CHANNEL PAUSE /STILL C.RESET EXIT SEARCH -MODE SLOWMENU DISPLAYSPEED STOP PLAY RECORD REW F.FWD 1 2 3 4 5 6 7 8 9 11 0 44 22 33 EN 44 9. Recording Features Timer Recording Hints for Timer Recording •Insert a tape with its record tab into the unit. • If there is a power failure or the unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If the tape runs out before the end time, the unit will switch to the Stop mode immediately, eject the tape and the power will be turned off. The TIMER indicator will flash. • If a tape is not in the unit or does not have the record tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape. • When all the Timer Recording are completed, the TIMER indicator flashes. To play or eject the recorded tape, press [STANDBY-ON] first, and then press [PLAY B BB] or [EJECT A AA]. 11 MENU - M E N U - B TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP 55 Select the desired start time (hour). Select the minute. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 10 / 2 4 MON START TIME 0 7 : 3 0 – – END TIME – – : – – – – CHANNEL – – REC SPEED – – F.FWD STOP or PLAY STOP or PLAY 99 ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 2 4 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 1 6 REC SPEED SP B SP SLP STOP PLAY Select the desired recording speed. or 22 PROGRAM NUMBER 1 DATE – – / – – START TIME – – : – – – – END TIME – – : – – – – CHANNEL – – REC SPEED – – STOP PLAY Select an empty program number. or C.RESET EXIT To cancel a Timer Recording that is in progress Press [STOP/EJECT P PP / N NN] on the unit. 10 1010 Turn off the VCR for recording. • TIMER indicator on the VCR lights up. STANDBY-ON Hint HintHint • To go back one step, press [REW h hh ] (during steps 3) to 9) ). To Check, Correct, or Cancel a Timer Program Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) VIDEO ANT IN OUT AUDIO OUT IN OUT L R IN ANT IN OUT AUDIO VIDEO OUT IN OUT L R IN Connect 12Connect (Back of Playing VCR) (Back of Recording VCR*) RF Cable (supplied) *Front input jacks are also available Audio/Video Cables (not supplied) 66 ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 2 4 MON START TIME 0 7 : 3 0 PM END TIME – – : – – – – CHANNEL – – REC SPEED – – AM B PM STOP PLAY Select “AM” or “PM”. or 33 PROGRAM NUMBER 1 B ONCE DAILY WEEKLY STOP PLAY Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”. or 1) Turn the power on by pressing [STANDBY-ON]. 2) Select main menu by pressing [MENU]. 77 Repeat the procedure in steps 5) and 6) to set the end time. 1) Insert a pre-recorded tape into the playing VCR. 2) Insert a tape with its record tab into the recording VCR. 3) Select "TIMER PROGRAM MING" by pressing [PLAY B BB] or 3) Press [SPEED] on the remote control of the recording VCR to select 44 Select the desired month. Select the desired day. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 0 3 MON START TIME – – : – – – – END TIME – – : – – – – CHANNEL – – REC SPEED – – F.FWD STOP or PLAY • You can program one year in advance. STOP or PLAY the desired recording speed (SP/SLP). [STOP C CC]. Then, press 4) Select the “L1” or “L2” position on the recording VCR. • To use the input jacks on the back of this unit, select "L1" position by [F.FWD g gg]. 4) Select the program number 88 ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 2 4 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 1 6 REC SPEED – – STOP PLAY Select the desired channel. • If you have connected the unit to a cable box or satellite box as the Connection on page 1, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording. or which you want to check by pressing [PLAY B BB] or pressing [0], [0], [1] on the remote control or [CHANNEL ]. • To use the input jacks on the front of this unit, select "L2" position by [STOP C CC]. The details of the pressing [0], [0], [...