Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Magnavox Dateigröße: 498.13 kb Dateiname: Unterrichtssprache:

MVR630MG VIDEO OUT Jack Details are on pages 10, 32, and 38. VIDEO IN Jack AC Power Cord Connect to a stan audio-visual source (laser disc dard AC outlet to player, digital video disc player, supply power to the etc.) here. Details are on page 32. VCR. Use the supplied RF coaxial cable to connect this jack to the ANTENNA IN Jack on your TV, Cable Box, or Direct Broadcast System. Details are on pages 6-9. mvr630mg.QX33 2/11/02 12:05 PM Page 24 24 Playing Read and follow the steps below to play a tape. 1Turn on the TV. Turn on the TV and set it to channel 3 or 4, whichever 1 channel the CH3/CH4 switch on the back of the VCR is set 2Insert a tape in the VCR. to. 2 2 Insert a tape in the VCR. The POWER, VCR/TV, and CST. IN lights will appear on the display panel. If the tape’s record tab is missing, playback will start automatically. 3 3 If playback does not start automatically, press the PLAY/o button. 4 4 Press the STOP/p button to stop playback. 5 5 Press the REW(ind)/{ button to rewind the tape. 6 6 Press the EJECT button to remove the tape. CH 321 654 987 0 POWER STATUS/EXIT MEMORY SLOWREC/OTR SPEED TIME SEARCH STILL/PAUSE VCR/TV EJECT MENU CLEAR REW PLAY STOP F.FWD 3 5 4 6 Helpful Hints • If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the PLAY/o button. • Other playback options and features are on pages 33-40. • If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. Details are on page 33. • Tape playback will not begin automatically if a timer recording is set and the VCR power is off. Details are on page 37. • If you used the AUDIO and VIDEO OUT jacks to connect the VCR to the TV, see page 10. You need to choose a channel other than 3 or 4 at the TV to see the VCR image on your TV. mvr630mg.QX33 2/11/02 12:05 PM Page 25 Recording 25 Read and follow the steps below to record a television program. 1 1 Turn on the TV and set it to channel 3 or 4 - the channel to which the CH3/CH4 switch on the back of the VCR is set. 2 2 Insert a tape with its record tab intact in the VCR. If playback begins, press the STOP/p button to stop the tape. 3 3 If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appear, press the VCR/TV button once. 4 4 Press the SPEED button repeatedly until the desired tape speed (SP or SLP) appears briefly on the screen. (Details about tape speed are on page 30.) 5 5 Use the CH(annel) o/p button or the Number buttons to select the channel you want to record. 6 6 Press the REC(ord)/OTR button once to start recording. The RECORD light will appear on the display panel. 7 7 To pause the recording, press the STILL/PAUSE button once. The RECORD light will flash. To resume recording, press the REC(ord)/OTR button or press the STILL/PAUSE button again. The RECORD light will come on again. 8 8 To stop recording, press the STOP/p button. 1Turn on the TV. 2Insert a tape in the VCR. CH 321 654 987 0 POWER STATUS/EXIT MEMORY SLOWREC/OTR SPEED TIME SEARCH STILL/PAUSE VCR/TV EJECT MENU CLEAR REW PLAY STOP F.FWD • If you press the REC(ord)/OTR button when a tape is not in the VCR, NO CASSETTE will flash on the screen. • If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CAN- NOT RECORD will flash on the screen. • For recording options, see pages 26-32. • You can change the tape speed dur- ing a recording, but some distortion will appear on the tape. • The VCR records in a preset volume. • If you used the AUDIO and VIDEO OUT jacks to connect the VCR to the TV, see page 10. You need to choose a channel other than 3 or 4 at the TV to see the VCR image on your TV. Helpful Hints 5 74 6 8 3 mvr630mg.QX33 2/11/02 12:05 PM Page 26 26 Recording One Channel/Watching Another 1 1 Press the REC(ord)/OTR button to start a recording of the current channel. (See page 25.) The RECORD light will appear on the VCR display panel. 2 2 Press the VCR/TV button to put the VCR in TV position. The VCR/TV light will disappear from the VCR display panel. 3 3 Use the TV remote control to select the channel you want to watch at the TV. 4 4 To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV (the channel to which the CH3/CH4 switch on the back of the VCR is set). 5 5 Press the VCR/TV button to put the VCR in VCR position. The VCR/TV light will appear on the VCR display panel again. 6 6 Press the STOP/p button to stop the recording. MENU CH 321 654 987 0 POWER STATUS/EXIT MEMORY SLOWREC/OTR SPEED TIME SEARCH STILL/PAUSE VCR/TV EJECT CLEAR REW PLAY STOP F.FWD 3Select the channel you want to watch at the TV. 4Select channel 03 or 04 at the TV. 2,5 6 1 Helpful Hints • If you use a Cable Box or Direct Broadcast System, you may not be able t...

Herunterladen

Geben Sie zwei Ziffern: