Login:
Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Anleitung Magnavox, modell VR601BMX

Hersteller: Magnavox
Dateigröße: 655.54 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


. Place the VCR in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) 1 1 Press the CHANNEL o/p buttons or the Number buttons to select the channel you want to record. 2 Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on the screen. Recording will begin immediately. The 2 REC(ord) light and the TIMER light will appear on the display panel. OTR (0:30) CH12 3 POWER EJECTVCR/TV 1 2 3 4 5 6 7 8 9 0 CHANNEL MEMORY STATUS/EXIT CLEAR SLOWMENU REWIND /PLAY F.FWD REC/OTR PAUSE/STILL/STOP TIME SEARCHSPEED 3 To stop an OTR before recording is finished, press the STOP/p button. To cancel the OTR but continue recording, press the REC(ord)/OTR button repeatedly until REC appears in the upper left corner of the TV screen. (STATUS must be set to ON. See page 20 for details.) The REC(ord) light will remain on the display panel of the VCR, but the TIMER light will disappear. Helpful Hints • To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. • To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on the screen. • If you begin an OTR when another recording is paused, the OTR will begin. • You can not pause an OTR. • If the preset time for a timer recording comes up during an OTR, the OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and turn off the VCR immediately. The timer recording will take place if you turn off the VCR before the timer recording’s scheduled start time. 28 Timer Recording Follow the steps below to program your VCR to record TV programs while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin: l Set up the channels at the VCR. l Set the clock. l Put a tape in the VCR. Make sure the tape’s record tab is intact 2-3 and the tape is long enough to record the program(s). . Put the VCR in VCR position. The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once. Do each step within 60 seconds of the previous step. 1 Press the MENU button. SELECT op CHOOSE B > PROGRAM VCR SET UP TUNER SET UP SET CLOCK 1 TO END PUSH EXIT 2 Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B button. SELECT op CHOOSE B > ONCE DAILY WEEKLY PROGRAM REVIEW TO END PUSH EXIT 3 Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, or WEEKLY recording. Then, press the F.FWD/B button. . ONCE: The VCR will record a TV program on any day you choose, up to 12 months away. . DAILY: The VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time. . WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week. DAILY PROGRAM (MON-FRI) Daily PROGRAM -1 2 3 4 5 6 7 8Recording (example) SELECT PROGRAM NUMBER TO END PUSH EXIT • If you need to make a correction while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information. Helpful Hint POWER EJECTVCR/TV 1 2 3 4 5 6 7 8 9 0 CHANNEL MEMORY STATUS/EXIT CLEAR SLOWMENU REWIND /PLAY F.FWD REC/OTR PAUSE/STILL/STOP TIME SEARCHSPEED Timer Recording (cont’d) 29 4 Use the Number buttons (1-8) to select a slot in which to store the timer recording. There are eight slots. Numbers for open slots will flash on the screen. NOTE: If you enter a number for a slot that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen briefly. Information about the program in that slot will appear on the screen. If this happens, press the STATUS/EXIT button, then select another number. 5 Use the Number buttons to enter the channel you want to record. . Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. There also may be a brief delay when you select channels 10, 11, and 12. If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7. Antenna Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay. You may only select channels 2-69. . If you are recording from line input, press 0,0 to select AV REAR. . If you are using a Cable Box/DBS, select the Cable Box/DBS output channel (03 or 04). Set the Cable Box/DBS to the channel you want to record. Leave the Cable Bo...

Dieses Handbuch ist für folgende Modelle:
Kameras - VR401BMX (655.54 kb)
Tragbare Kassettenspieler - VR601BMX99 (655.51 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien