Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Magnavox Dateigröße: 450.31 kb Dateiname: Unterrichtssprache:

(Press and hold PLAY during tape play for three seconds to switch the VCR’s RF output channel to 3 or 4. Channel 3 is the default setting.) 2 2 Insert a tape with its record tab intact (see page five) in the VCR. The POWER, VCR/TV, and CST.IN lights will appear. If the VCR/TV light does not appear, press VCR/TV so the VCR/TV light appears. 3 3 Press SPEED until the desired tape speed (SP or SLP) appears on the screen. The tape speed will disappear after about five seconds. You can change the tape speed while the VCR is recording, but some distortion may appear on the tape. See page 44. 4 4 Use CH or the Number buttons to select a channel to record. 5 5 Press REC once to start recording. The red REC(ord) light will appear. If the tape is missing the record tab, the VCR will eject the tape. 6 6 To pause recording (for example, during commercials), press STILL/PAUSE once. The REC(ord) light will flash. To resume recording, press REC or STILL/PAUSE again. The REC(ord) light will stay on. 7 7 Press STOP to stop recording. 1 1 Turn on the TV. 2 2 Insert a tape. 7 4 3 CH 321 654 987 0 POWER STATUS REC MEMORY VCR/TV EJECT SLOW SPEED SEARCH MODE STILL/PAUSE MENU CLEAR REW PLAY STOP F.FWD 6 5 Helpful Hints • Other recording options are on pages 25-32. • The VCR will record in a preset volume. • Pause will switch to Stop after five minutes to protect the VCR and the tape from damage. Review the pause time remaining with the marks on the screen. Each mark equals one minute. During the last minute of paused recording, the mark will flash. • You cannot start a recording if a VCR menu is on the TV screen. • If you used audio and video cables to connect the VCR to the TV as shown on page 10, set the TV to its Video In or Auxiliary In channel instead. See your TV manual for details. One-Touch Recording 25 One-Touch Recording lets you program an immediate timed recording 30 minutes to eight hours long. Make sure: Channels are set. The desired recording speed (SP, SLP) has been selected with SPEED. There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s). The VCR is in VCR position. (The VCR/TV light will appear. If it does not, press VCR/TV once.) 3 1 1 Use CH or the Number buttons to select the channel you want to record. 1 2 2 Press REC (or RECORD on the VCR) repeatedly until the desired recording length (30 minutes to eight hours) appears in the upper left corner of the screen. Recording will begin immediately.The TIMER and REC(ord) lights will appear on front of the VCR. 2 OTR (0:30) SP 3 3 To stop an OTR before recording is finished, press STOP on the remote or STOP/EJECT on the VCR. To cancel the OTR but continue recording, press REC or RECORD repeatedly until REC appears in the upper left corner of the screen. When the OTR is finished, the VCR will eject the tape and turn itself off. CH 321 654 987 0 POWER STATUS SLOWREC MEMORY SPEED SEARCH MODE STILL/PAUSE VCR/TV EJECT MENU CLEAR REW PLAY STOP F.FWD Helpful Hints • To change the recording length while an OTR is in progress, press REC or RECORD repeatedly until the desired length appears on the screen. • You cannot pause OTR recording. • If the preset time for a timer recording comes up during an OTR, the OTR has priority.The timer recording will not occur. • To show the time remaining for an OTR, press STATUS repeatedly until OTR and the time remaining appear on the screen. • If the end of the tape is reached during an OTR, the VCR will stop recording, eject the tape, and turn itself off. 26 Timer Recording Your VCR can record TV programs while you’re away.You can program up to eight timer recordings. For each one, the VCR will turn itself on, record, and turn itself off. Make sure: 1-3 Channels are set. The clock is set. There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s). The VCRis in VCRposition.The VCR/TV light will appear.If it does not, press VCR/TV once. 1 1 Press MENU until MENU appears. Press PLAY or STOP to select TIMER PROGRAMMING. Press F.FWD. Available program numbers will flash. 1 TIMER PROGRAMMING PROG. 12345678 DATE START TIME END TIME CHANNEL REC SPEED 2 2 Press PLAY or STOP repeatedly to select a program number. Press F.FWD. (If you select a program number that already has a timer recording stored, information about that program will appear. Press PLAY or STOP to select another program number.) PROGRAM NUMBER 1 DATE –– / –– START TIME –– :–– –– END TIME –– :–– –– CHANNEL – – REC SPEED – – CH 321 654 987 0 POWER STATUS SLOWREC MEMORY SPEED SEARCH MODE STILL/PAUSE VCR/TV EJECT MENU CLEAR REW PLAY STOP F.FWD 3 3 Press PLAY or STOP repeatedly to select a ONCE, DAILY,or WEEKLY recording.When the arrow is beside your choice, press F.FWD. ONCE - The VCR will record a TV program on any day you choose, up to 12 months away. DAILY - The VCR will record a TV program at the same time on the same channel every day, ...

Herunterladen

Geben Sie zwei Ziffern: