Stimmen - 6, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The following information will guide you to install and use the PC Camera to its full capabilities. • System’s requirements Personal Computer, Laptop, Desktop, or IBM Compatible Computer with Pentium 166MHz minimum, and with an active USB (universal serial bus) port. Windows 98/ME/2000/XP, CD-ROM drive, color monitor, mouse and keyboard. For videoconference, Internet connection must be equipped. • Package includes PC Camera CD Installation Disc And (With USB cable) Manual 2 • USB PC Camera • Specification Image Sensor: 1/4.CMOS, 640.480pixels Frame Rate: 30fps@640x480, @600x800, @320x240, @160x120 Lens: F=2.4, f=4.9mm View Angle: 54 degree Focus Range: Automatic focus, 10cm to infinity Exposure Control: Automatic White Balance: Automatic Still Image Capture 800x600,640X480,352x288,320x240,176x144, Res.: 160x120 3 Flicker Control: 50Hz, 60Hz and None Computer Port USB port • Installing camera’s driver Driver’s Installation Instruction for Windows 98/ME/2000/XP NOTE: Please Uninstall All Previous Installed WEBCAM BEFORE Installing A4 TECH ViewCAM. DO NOT CONNECT A4 TECH ViewCAM TO THE COMPUTER UNTIL ITS DRIVER IS INSTALLED! 1. Insert the included CD into the CD-ROM: The Auto-run Menu Window will popup, move the mouse cursor to and click on “Install viewCAM”. 2. Please select your ViewCAM model and click on the product 4 image to install (As the right image). Then dialogue box will appear on the computer screen as below: 3. process Follow the on screen instruction to complete the installation 5 4. When the Installation Process is completed 5. Click “Finish” to complete installation. Now, the shortcut Amcap and Zoom images will appear on the computer desktop 6. Plug the PC Camera’s USB cable to the computer’s USB Port, and restart your computer. Amcap Usage After installation of view cam driver, you can pre-view image and set the adjustments for the properties sheet through the image application software which comes with the product. 6 Image-preview Click button on the desktop and the Amcap image application will pop-up or from “start” to “application”“A4TECH USB PC Camera H”,and click “Amcap” by mouse the application image will appear shown as below 7 if Amcap image fails to appear,please select the preview below “ Options “shown as follows : Device description Go to “Devices” and select “A4 Tech USB PC Camera H”. (Refer to below diagram) 8 Properties page configuration Go to “Options”, then select “Video Capture Filter…”(Refer to below diagram) The Properties configuration page will pop-up as below: 9 Most settings can be adjusted here Advanced settings PK-5 offers the image special effect and video special effect settings for the users, our design engineers have defined 15 special effect settings, by using them, it will allow you to operate easily and edit the images more efficiently. Shown as below. 10 Digital View Cam adjustable focus description PK-5 can provide 10 times adjustable focus function under CIF(352.288) resolution, accompanying digital adjustable control pole .Level-sliding zoom image and the special filter make images more clear, See the control page and select the options after adjusted focus‘+’‘ —’ or select digital 11 adjustable focus control pole Before adjustment after adjusted NOTE : It totally supports QQ.MSN ….etc video chat software under 352*288.320*240.176*144.160*120 …etc resolutions. 12 • Checking connection of your camera 1. Plug the USB cable to the computer’s USB Port. 2. Restart your computer when Installation is completed. 3. Double click “My Computer” icon->Control Panel->System->Device Manager ->Imaging Device; if you see “A4 Tech USB PC Camera”, then your camera is now installed. For Windows 2000 /XP: Double click “My Computer”icon->Control Panel->System-> Hardware->Device Manager->Imaging Device; if you see “A4 Tech USB PC Camera H”, then your camera is installed. • Uninstalling Driver Click“Start”from the task bar and choose “Programs”. Select “A4 Tech USB PC Camera H”->“Uninstall” and follow the instructions. 13 • VP-EYE The latest version of VP-EYE offers a new look that makes image editing much more fun and intuitive. There are a lot of improvements and enhancements that comes with VP-EYE 4.0 here are some of the new features that you can expect in VP-EYE 4.0. (,) 1. Enter the setup interface of the ViewCam driver installation 2. Click "VP-EYE" for increment application installation, the below interface as shown in the picture will automatically pop up for your setup, according to the four rotundity buttons displayed by the interface. Note: please wait 20—60 seconds in working order if you click "VP-EYE", because your computer need time to read the date of this program. 14 • Click " program assembly names " by moving mouse cursor , now ,you can name or modify the default name under " My Computer -Start -all Programs " for the convenience to run. • When you click " " VP-EYE application " by moving the mouse cursor ,this means that you can start to install 7 usual appl...