Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
AUTOMATIC MEMORY TUNING The VCR can receive a maximum of 181 channels by presetting the channels into memory. CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV. 1 Press the MENU button. Press the TRACKING/SET + or – button to select the CH SET UP option, then press the ENTER button. 2 Press the TRACKING/SET + or – button to select the AUTO CH MEMORY mode, then press the ENTER button. 3 The auto tuning will start. The channel display will count up and when finished, the screen returns to normal. Channel numbers will remain red until auto memorizing is complete. 16 .+/–/ENTER/MENU. CH SET UP TV CATV AUTO CH MEMORY ADD/DELETE CH 001 .+/–/ENTER/MENU. MENU CLOCK SET TIMER REC SET ON OFFAUTO REPEAT CH SET UP LANGUAGE/IDIOMA/LANGUE ON OFF NO NOISE BACKGROUND TO ADD/DELETE CHANNELS 1 Press the MENU button. Press the TRACKING/SET + or – button to select the CH SET UP option, then press the ENTER button. 2 Press the TRACKING/SET + or – button to select the ADD/DELETE mode, then press the ENTER button. 3 Select the desired channels to be added or deleted using the TRACKING/SET + or – button. .+/–/ENTER/MENU. .+/–/ENTER/MENU. CH SET UP TV CATV AUTO CH MEMORY ADD/DELETE ADD CH 002 .+/–/ENTER/MENU. MENU CLOCK SET TIMER REC SET ON OFFAUTO REPEAT CH SET UP LANGUAGE/IDIOMA/LANGUE ON OFF NO NOISE BACKGROUND 4 Press the ENTER button if you wish to DELETE the channel from memory. Press the ENTER button if you wish to ADD the unmemorized channel. Repeat Steps 3 and 4 for each channel to be added or deleted. 5 Press the MENU button three times after adding or deleting all of the desired channels, to return to normal TV viewing. NOISE ELIMINATION When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to the "ON". CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV. 1 Press the MENU button, then press the TRACKING/SET + or – button to select the NO NOISE BACKGROUND option. 2 Press the ENTER button to select the ON position. 3 Press the MENU button again. .+/–/ENTER/MENU. MENU CLOCK SET TIMER REC SET ON OFFAUTO REPEAT CH SET UP LANGUAGE/IDIOMA/LANGUE ON OFF NO NOISE BACKGROUND .+/–/ENTER/MENU. MENU CLOCK SET TIMER REC SET ON OFFAUTO REPEAT CH SET UP LANGUAGE/IDIOMA/LANGUE ON OFF NO NOISE BACKGROUND 4E30401A E P14-19 16 17/04/2001, 14:01 LOADING AND UNLOADING Use only video cassette tapes marked . LOADING Push the center of the tape until it is automatically retracted. AUTOMATIC POWER ON The VCR will turn on automatically and the clock counter display will change to the counter display. AUTOMATIC PLAY When loading a cassette tape without the erase prevention tab, playback will start immediately. Insert the cassette with its labeled side facing you. An inverted cassette cannot be inserted. UNLOADING To unload a cassette, press the STOP/EJECT button on the VCR twice. The first press will stop the tape in any mode. The second press will eject the tape. " " will appear on the screen for about 4 seconds. The Tape In indicator will flash in the display for about 4 seconds. The counter display will change to the clock display. AUTOMATIC EJECT If the VCR automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically (See the NOTE on page 19). NOTES: • Always eject the tape when not in use. • The cassette can be ejected even if the VCR is turn off. PLAYBACK To play a prerecorded cassette tape. TO START PLAYBACK CHECK BEFORE YOU BEGIN Turn ON the TV and set to the video channel 3 or 4. When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV. 1 Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). The clock display will change to the counter display. 2 Press the PLAY button. Playback will start. " " will appear on the screen for about 4 seconds. The PLAY indicator will light in the display for about 4 seconds. TO STOP PLAYBACK Press the STOP button once. The tape will stop but remain fully loaded and ready to play. " " will appear on the screen for about 4 seconds. The STOP indicator will light in the display for about 4 seconds. This VCR selects the playback tape speed SP, LP or SLP automatically. TO REWIND OR FORWARD THE TAPE RAPIDLY Press the REW button in the STOP mode. " " will appear on the screen for about 4 seconds. The REW indicator will l...
Dieses Handbuch ist für folgende Modelle:Kameras - MVR2040A (438.97 kb)
Kameras - MVR2041 (438.97 kb)