Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Unit weight of item is unknown 1. Turn on the scale. 2. Place the samples on the platform and the exact weight of samples will be displayed. 3. Input the quantity of the samples, Then press “SET UNIT” key, Remark: the unit weight will be stored in the scale and can be recalled by pressing the “UNIT WGT” key. 3 (B). Unit weight of item is known 1. Turn on the scale. 2. Input the unit weight of the samples. 3. Press “UNIT WGT” key. The unit weight of the sample is stored in the scale. COUNTING 1. The scale is powered on 2. Put objects on the scale platform 3. Press “UNIT WGT” key. 4. The quantity of the objects will be shown on the TOTAL (PCS) display. ACCUMULATE COUNTING: 1. Repeat COUNTING procedures above (1) to (4). 2. Press “M+” key. 3. The ‘UNIT WEIGHT” display will show followed by . 4. After 2 seconds, the scale will return to the counting model 5. Take off the first samples and put the second samples (e.g. 30 pcs) on the scale platform. 6. Press “M+” key. 7. The ‘UNIT WEIGHT” display will show followed by . 8. Repeat the procedures until all the samples are counted. 9. Press “ZERO” key and “CE”, to clear the “WEIGHT” and “UNIT WEIGHT” display. 10. The total accumulated quantity will be displayed by pressing “M+” key. 11. Press “MC” key to cancel the accumulated quantity. WEIGHT ACCUMULATING 1. When the “UNIT WEIGHT” display shows 0, place samples on the scale platform. 2. Press “M+” key. The weight will be stored. 3. Take off the first samples from the scale and put the second samples on the scale platform. 4. Repeat procedure (2) until all the samples are weighted. 5. To recall the accumulated weight, press “M+” key when “WEIGHT” and “UNIT WEIGHT” display show “0”. 6. Cancel the accumulated weight by pressing the “MC” key. SELECTING WEIGHT UNIT When the scale is power on, press the “KG/LB” key repeatedly to change weight unit according to following sequence: kg --- g --- lb Displays 3 modes, e.g. “kg” mode .. 1.500kg “g” mode .. 1500g “lb” mode .. 3.32lb 5 UPPER AND LOWER QUANTITY LIMIT SETTING 1. Turn the scale on. 2. Press “PRESET QTY” key, the 3 LCD will show as below. 3. Input the upper limit quantity in the “UNIT WEIGHT” display. Then press “M+” key to confirm. 4. Input the lower limit quantity in the “TOTAL (PCS)” display. Then press “M+” key to confirm. 5. Place the samples on the scale platform. When the quantity arrives at the upper limit, the scale will alarm with a beep sound. The “WEIGHT” display will show the weight, the “UNIT WEIGHT” display will show . 6. If the quantity of the sample is below the lower limit, scale will alarm with beep, beep sound. The “WEIGHT” display will show the weight, the “UNIT WEIGHT” display will show . 7. The upper & Lower quantity limit can be cancelled by pressing the “CANCEL PRESET” key. USING THE TARE MODE: 1. Turn the scale on. 2. “0.000” will be shown on the “Weight” display after a few seconds. 3. Place an item on the weighing platform and read the value accordingly. 4. Press the “TARE” key...
Dieses Handbuch ist für folgende Modelle:Waagen - C136 (181.85 kb)
Waagen - C6630 (181.85 kb)