Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Kompernass Dateigröße: 637.89 kb Dateiname: Unterrichtssprache:

The red LED display lights up. The running display “bALAnCE” appears on the display above the line, and the display “— kg” below the line. After approximately 2 seconds the green LED display lights up and “0.0kg” appears on the display below the line. The scale is now ready for operation. 3. Press the key i to select the unit kg or lb. The following alternative measuring methods are available: Q a) Weighing with subsequent establishment of body fat and water contents 1. Step on the scale for weighing. Note: Stand on the metal contacts without shoes or stok-kings. Your feet must be clean and dry when you step on the scale. However, very dry feet can affect the measurement. In this case, moisten your feet with a moist cloth and repeat the measurement. 2. As soon as the weight has been established the display “H” appears as described in Chapter 7. Press the keys “A” or “v” to select your pre-programmed storage place (1-10) and confirm by pressing the key i 3. For control purposes, the stored settings “Sex and Age” followed by “Sex and Size” of the selected storage place are shown on the display for control purposes. 8 4. The rotating “CCCC” display above the line appears during the establishment of body weight and water contents. As soon as the process has been completed the values established for body fat and water contents alternately appear on the display. 5. When you step off from the scale the running display “bALAnCE“and “0.0kg” again appears on the display. The scale is now ready for the next measurement. If you remain on the scale, the scale switches off automatically after 60 seconds. Q b) Simultaneous establishment of weight, body fat and water contents 1. Press the keys “A” or “v” to select your pre-programmed storage place (1-10) and confirm by pressing the key i. 2. For control purposes, the stored settings “Sex and Age” followed by “Sex and Size” of the selected storage place are shown on the display for control purposes. 3. Step on the scale for weighing. Note: Stand on the metal contacts without shoes or stockings. Your feet must be clean and dry when you step on the scale. However, very dry feet can affect the measurement. In this case, moisten your feet with a moist cloth and repeat the measurement. 4. The weight is now established on the display under the line while the “H” is flashing as described before. As soon as it stops flashing the established weight will be displayed. 5. The display “CCCC” above the line simultaneously shows that body fat and water contents are being established. As soon as these have been established the results will be displayed alternately. 9 ! a nn UU 3 6. When you step off from the scale the running display “bALAnCE“and “0.0kg” again appears on the display. The scale is now ready for the next measurement. If you remain on the scale, the scale switches off automatically after 60 seconds. Q Displays „0-Ld“ The weight on the scale exceeds 160kg / 352lb Remote K> Scale „Err“ The batteries for the remote control are almost empty and need replacing. The batteries of the scale are almost empty and need replacing. The scale is unable to measure body fat and water contents. Should this error message appear, proceed as follows: - check the stored entries for completeness and correctness. - step on the metal contacts; do not wear shoes or stockings. Your feet must be clean and dry when you step on the scale. Feet that are too dry can however affect the measurement. In this case moisten your feet with a moist cloth and repeat the measurement. - stand as still as possible on the scale and do not interrupt the measuring process. The remote control is not properly connected to the scale or the scale is off. Put the remote control within the range of the transmitter or switch on the scale. © Care instructions • Clean the scale only with a neutral cleaning agent and a moist cloth. • Remove the batteries if the scale is not in use for an extended period of time. Store the scale in a dry and clean place. • Do not attempt to disassemble or repair the scale. • Treat the scale carefully. Do not drop it and do not jump onto it. 10...

Herunterladen

Geben Sie zwei Ziffern: