Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Preparation before Operation 1. Avoid operating the scale in the locations where there is too much temperature changes and air flow, for example, the place under sunlight or air condition. 2. Use the independent power socket to avoid the interrupt of other electronic product. 3. When turning on the scale, do not place any object on the platter. 4. When operating the scale, place the object on the center of the platter. For the accuracy of weighing, do not place the object over the range of the platter. 5. When the low power indication ( ) lights up, the scale needs to be recharged. Display Description 31 2 HIGH : Upper limit. To warn the object is over the setting upper limit value. And it means the weight excessively is high OK : Value between upper and lower limit. To warn the weight of object is in the normal setting range. LOW : Lower limit. To warn the object is under the set upper limit. And it means the weight is not enough. kg : Unit “kilogram” lb : Unit “pound” a0• : “Zero” indication Net : “Net Weight” indication : “Low Power” indication 61 : (STABLE) “Stable” indication 62 : (PT) “Pre Tare” mode 63 : (M+) “Accumulation” mode Weighing 1 ZSME300000036 EXCELL PRECISION CO., LTD. Keyboard Description UNITS ESC PRESET M+ : “UNITS” . Press the key to select the weighing unit “kg” or “lb.” 1. ”ESC” . Return function. 2. : Preset function for weight. 3. Accumulation function for weight. 4. TARE/< : ”TARE” . tare function; ”<” . to move the cursor leftward. : Pre-tare function. To recall the value of accumulation, tare, and pre-tare. To clear the value of accumulation, tare, and pre-tare. : ”ZERO” . to re-zero weight value; ”>”. to move the cursor rightward. “PRINT” . printing. “ENTER” . confirmation key. . backlight setting; ”^” . to add number or move the menu upward. “HOLD“ . printing summation “SAMPLE” . sampling function. ”G/N” . net and gross weight switch function; ” v ”. to deduct number or move the cursor downward. 13. ON : To turn on the scale. 14. OFF : To turn off the scale. 5. PRETARE 6. RECALL : 7. CE : 8. ZERO/> PRINT 9. ENTER 10. BL/^: ”BL” HOLD 11. SAMPLE 12. G/N/v: Weighing 2 ZSME300000036 EXCELL PRECISION CO., LTD. Function & Operation Backlight Function Press BL/^ to select 3 backlight modes in cycle: . , . , . . . . . Auto backlight mode. When the weight is more than 10d, or pressing keys, the backlight will light up. After re-zeroing (the weight less than 10d) for 5 seconds, the backlight will be off. . Backlight always lights up. . Backlight off. Weighing Function (1). Unit Selection 1. After turning on the scale, press Key to select the unit “kg” or “lb.” The screen will display indications “kg” or “lb”. UNITS ESC 2. After turning off the scale, the scale will memorize the weighing unit. When turning on the scale next time, the weighing unit used previously will be recalled directly. (2). Check-weighing Function 1. “Lower limit”, “Upper limit”, and “Buzzer” Presetting. Press BL/^ , G/N/v , TARE/<, PRINT ENTER ZERO/>, UNITS ESC to input the pre-set value. Description as below: TARE/< : To move leftward. ZERO/> : To move rightward. BL/^ : To deduct the number by 1. G/N/v : To add the number by 1. ENTER : Confirmation key. ESC : Return key. Weighing 3 ZSME300000036 EXCELL PRECISION CO., LTD. Example: “Lower Limit” Presetting (lower limit >10d, d=division) ex.: lower limit = 20kg. Press PRESET key, the screen displays• • . Press ZERO/> once, the screen displays • • . Press BL/^ twice, the screen displays • • . Meanwhile, if pressing ENTER key, the screen will display “0” instead of ” ”. “Upper Limit” Presetting (upper limit . lower limit) ex.: upper limit = 25 kg. Press ENTER once, the screen displays• • . . Press ZERO/> once, the screen displays • • . . Press BL/^ twice, the screen displays • • . . Press ZERO/> once, the screen displays • .. . Press BL/^ 5 times, the screen displays • .. . Meanwhile, if pressing ENTER key, the screen will display “0” instead of ” ”. “Buzzer” Presetting (refer to Note 1) ex.: buzzer = 22. Press ENTER once, the screen displays• • . Press BL/^ twice, the screen displays• • . Press ZERO/> once, the screen displays • • . Press BL/^ twice, the screen displays • • . Press ENTER once, the screen displays . . Weighing 4 ZSME300000036 EXCELL PRECISION CO., LTD. • Single Point Presetting Lower limit only Method (I) After finished presetting lower limit, the screen displays• • . . Press PRESET once again. If the screen displays . , the “single point presetting” is completed. Method (II) After finished presetting lower limit, upper limit and buzzer, press PRESET once. When the screen displays• • . , press RECALL twice again. At this time the screen displays presetting upper limit, press CE once. If the screen displays . , the “single point presetting” is completed. Upper limit only After finished presetting, press PRESET once. When the screen displays • • . , press RECALL once. At this time the screen displays presetting lower limit, press CE once. Then the screen...