Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Press the measurement switch 2. Press the measurement switch gently. All display segments are displayed for several seconds. 3. Wait until the symbol is displayed. Wait until “0.0 kg /0.0 lb” and the Ready/Complete symbol are displayed. Note: If “0.0 kg /0.0 lb” and the Ready/Complete Step on the scale symbol are displayed about forty-five seconds, the scale will automatically turn off. Ready/Completesymbol 4. Step on the scale gently and stand still during the measurement. You will see the display changed to dashes. Please remain still as much as you can. 5. Your weight is displayed after the symbol is displayed. After about fifteen seconds, the scale will Step off the scale automatically turn off. 6. Step off the scale. Measurement SwitchSlide Switch English 4 Basic Measurement Measuring an Infant or Small Animal 1. Set the slide switch to the correct mode. Example: Set the slide switch to [WEIGHT B]. 2. Press the measurement switch gently and step on the scale. All display segments are displayed for several seconds. Step on the scale without any baby or animal in your arms before “0.0 kg /0.0 lb” is displayed. Set the slide switch to the correct mode Press the measurement switch Step on the scale kg Ready/Completesymbol 3. Have the infant or the animal placed in your arms Have the infant or the animal Remain on the scale and have the infant or the placed in your arms animal placed securely in your arms within ten seconds after the scale displays “0.0 kg /0.0 lb” and the Ready/Complete symbol . Remain still during the measurement until the Ready/Complete symbol is displayed. You will see the display changed to dashes. Please remain still as much as you can. Note: If “0.0 kg /0.0 lb” and the Ready/Complete symbol are displayed about forty-five seconds, the scale will automatically turn off. 4. The weight of the infant or the animal can be read after the symbol is displayed. After about fifteen seconds, the scale will kg Step off the scale automatically turn off. 5. Step off the scale. English 5 English 6 Measuring Your Weight on a Carpet Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic add-on feet. Steps for Attaching the Add-on Feet 1. Each add-on foot has two pins. Match those pins to the holes on the scale leg and insert firmly. 2. Attach add-on feet on all four legs. Notes .. Please be careful not to fall when using the add-on feet. .. We recommend using this scale on a solid and level surface. Specifications Digital display Maximum capacity Minimum display Wireless communication Power source Battery life Accessories Liquid crystal display, 25 mm character height 200 kg / 450 lb 0.1 kg / 0.2 lb WML-40AH (Mitsumi Electronics Co. Ltd.) Four type AA batteries (R6P or LR6, 1.5 volt x 4) Approximately 1000 measurements Add-on feet (4), Instruction manual, Batteries (4) Specifications are subject to change without prior notice or any obligation on the part of the manufacturer. Compliance with European Directives The scale complies with the statutory EMC (Electromagnetic Compatibility) directive 2004/108/EC. The WML-40AH is approved in accordance to R&TTE directive transmitter module marked by , manufactured by MITSUMI incorporated to OEM product. Notes: Indoor use only. The displayed value may be adversely affected under extreme electromagnetic influences. Compliance with FCC Rules The scale complies with part 15 of the FCC rules and contains the FCC ID POOWML-C40 . Compliance with Industry Canada IC: 4250A-WMLC40. Maintaining the Scale • Clean the scale with a soft dry cloth or a cloth moistened with water and a mild detergent. Never use alcohol, benzine, thinner or other harsh chemicals to clean the scale. • Remove the batteries from the battery compartment, when the scale is not going to be used for a long time. English 7 1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LTD. Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131 U.S.A. Telephone: [1] (408) 263-5333 Fax: [1] (408)263-0119 A&D Australasia Pty Ltd. 32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA Telephone: [61] (8) 8301-8100 Fax: [61] (8) 8352-7409 A&D KOREA Limited ........(.) .... ... .... .... 36-2 ... B/D 8 . ( 8th Floor, Manhattan Bldg. 36-2 Yoido-dong, Youngdeungpo-ku, Seoul, KOREA ) ..: [82] (2) 780-4101 ..: [82] (2) 782-4...
Dieses Handbuch ist für folgende Modelle:Waagen - UC-321PBT-G (381.6 kb)