|
Anleitung Zusammenfassung
• You will need an original charcoal filter for the recirculation mode. (See Special Accessories). 8 88888 electr electrelectrelectrelectrelectrolux oluxoluxoluxoluxolux control panel Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. • ONL ONLONLONLONLONLY EFC 9671-6671-9673 - Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 60671- 90671 models: 60671-90671 models:60671-90671 models:60671-90671 models:60671-90671 models:60671-90671 models: The hood can also be commanded from the control panel or the remote control. (the remote control is a special accessory and is ordered separately). • Corr CorrCorrCorrCorrCorrect ventilation: ect ventilation:ect ventilation:ect ventilation:ect ventilation:ect ventilation: If the cooker hood is to work correctly there must be an under pressure in the kitchen. It is important to keep the kitchen windows closed and have a window in an adjacent room open. • The control switches are located on the hood’s front panel electrolux control panel 9 Light switch (ON/OFF) ON/OFF motor speed key Push-button 2 (ON/OFF) Push-button 1 (ON/OFF) Push-button 3 (ON/OFF) Model EFC 9670-6670 • Light switch (ON/OFF): this switch is used to turn the light fitted in the hood on and off. • ON/OFF motor speed key: serves to enable and disenable the speed selection keys. • Push-button 1 (ON/OFF): used to set the fan to speed 1. • Push-button 2 (ON/OFF): used to set the fan to speed 2. • Push-button 3 (ON/OFF): used to set the fan to speed 3. 10 electrolux control panel Modell EFC 9671-6671-60671-90671 1. Lights key ON/OFF 2. Motor stand-by/OFF key: Stand-by (dot in the lit display): all the commands are enabled for functioning, press the key for more than 1 second to set the hood on OFF. OFF (display off): and the commands with the exception of the ON/OFF lights key are disenabled. Press the key for more than 1 second to set the hood in Stand-by. 3. Selection and aspiration speed (power) and timer key: press to select the aspiration speed (power) or set the hood in stand-by in the sequence:1-2-3-1- 2-..... Timer (ON/OFF): once the speed (power) has been selected, pressing successively for 2 seconds activates (ON – flashing dot on the display) or deactivates (OFF) the timer function. This allows the aspiration speed (power) selected for a predetermined time to function: Aspiration Speed (power) 1: 20 minutes Aspiration Speed (power) 2: 15 minutes Aspiration Speed (power) 3: 10 minutes After which the hood goes into stand-by. 4. Intensive aspiration (power) key (timed) ON (flashing dot on the display)/OFF: press to select the intensive aspiration speed (power). It will function for 5 minutes after which the hood goes into stand-by. Pressing before the five minutes have passed, the hood returns to the previously set speed. 5. Filters saturation reset key: see the relative text on the following pages. 6. Display Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds. After reconnecting the power supply wait 15 seconds and then check that the cooker hood is now operating correctly. 1 2 3 4 5 6 electrolux electroluxelectroluxelectroluxelectroluxelectrolux control panel 11 1111111111 Gr GrGrGrGrGrease and char ease and charease and charease and charease and charease and charcoal filter coal filtercoal filtercoal filtercoal filtercoal filter maintenance indicator maintenance indicatormaintenance indicatormaintenance indicatormaintenance indicatormaintenance indicator This hood is fitted with a device that indicates when it is necessary to clean the grease filter or the charcoal filter (if the hood is used in the recirculation version with a charcoal filter). EFC 9670-9671-9673- 6670 EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670 On delivery, the hood is not supplied with a charcoal filter, so the saturation indicator will be disabled. If the hood is to be used with a charcoal filter (EFC 90670-60670: (EFC 90670-60670:(EFC 90670-60670:(EFC 90670-60670:(EFC 90670-60670:(EFC 90670-60670: the hood is supplied with a charcoal filter), the saturation indicator light must be enabled as follows: Set in "OFF OFFOFFOFFOFF OFF" the hood. Press buttons 4 44444 and 5 55555 simultaneously and hold them for 3 seconds. At first only the grease filter LED F FFFFF will light up, but when the charcoal filter LED C CCCCC lights up the saturation indicator will be enabled. To disable it: Press buttons 4 44444 and 5 55555 again simultaneously and hold them for 3 seconds, until the charcoal filter LED goes out. Grease filter LED (F) LED F FFFFF will start to flash when it is time to clean the grease filter. ...
Dieses Handbuch ist für folgende Modelle:Ventilatoren - U31180 EFC 9670-6670 (2.31 mb)