Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. Remote Control Tower Fan Heater MODEL BFH6500126965/9100020008812Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. Remote Control Tower Fan Heater MODEL BFH6500126965/9100020008812 BFH6500CN08EFM1.qxd:BFH6500CN08EFM1.qxd 2/1/08 4:57 PM Page 1 HEATER SAFETY 14.To prevent a possible fire, DO NOT block air intakes or AUTO SAFETY SHUT-OFF WITH INSTANT TIP OVER DIGITAL THERMOSTAT Setting the Off Timer: exhaust in any manner. DO NOT use on soft surfaces, PROTECTION Your heater is equipped with a Digital Thermostat that 1. Select the Mode and/or temperature you wish the like a bed, where openings may become blocked. PLEASE READ AND SAVE This heater is equipped with a patented, allows you to set your heater to your precise comfort level. heater to run in. 15.To disconnect heater, turn controls to OFF, then remove technologically-advanced safety system that requires the 2. While the heater is running, press and hold the up and THESE IMPORTANT plug from outlet. user to reset the heater if there is a potential overheat down buttons simultaneously. 16.Avoid the use of an extension cord because the SAFEGUARDS situation. When a potential overheat temperature is Setting the Digital Thermostat: 3. By pressing the up and down buttons, program the extension cord may overheat and cause a risk of fire. reached, the system will automatically shut the heater off. It 1. Press the Mode Button once for manual HI power. The heater to turn off in up to 16 hours from the current When using electrical appliances, basic safety precautions However, if you have to use an extension cord, the can only resume operation when the user resets the unit. heater will run continuously on HI. time, in increments of 1 hour. cord shall be No. 14 AWG minimum size and rated not should always be followed to reduce the risk of fire, electric less than 1875 watts. For specific reset instructions please refer to the unit. 2. Press the Mode Button again for manual LO power. 4. After setting the timer, the LED display will return to shock, and injury to persons, including the following: The heater will run continuously on LO. show the current room temperature. A LED will 17.If the heater will not operate, see specific instructions To Reset the Heater: 1. Read all instructions before using the appliance. illuminate to show that the timer is activated. on Auto Safety Shut-off. 3. Press the Mode Button for a third time for Auto Mode If the unit shuts down: 2. To avoid fire or shock hazard, plug the appliance directly HI Power (AH) or press again for Auto Mode LO Power 5. After the predetermined length of time has passed, the 18.DO NOT attempt to repair or adjust any electrical or into a 120 V AC electrical outlet. 1. Unplug unit. (AL). In either of these modes you may then press the heater will automatically shut off. mechanical functions on this unit. Doing so will void , and down buttons to preset your desired 3. The heater is hot when in use. To avoid burns, DO NOT 2. Wait 10 minutes for unit to cool down. up Setting the On Timer: your warranty. The inside of the unit contains no user let bare skin touch hot surfaces. If provided, use handles serviceable parts. All servicing should be performed by 3. Plug in and operate normally. temperature. 1. While the heater is off, press and hold the up and down when moving this heater. Keep combustible materials, qualified personnel only. 4. Once you have preset your desired temperature, the NOTE: After reaching the preset temperature, the unit will buttons simultaneously. such as furniture, pillows, bedding, papers, clothes, display will return to current room temperature and 19.DISCONTINUE USE IF PLUG OR OUTLET IS HOT. WE and curtains at least 3 ft (0.9 m) from the front of the briefly continue to run with fan only. This ensures a gradually increase until the room has reached the 2. By pressing the up and down buttons, program the RECOMMEND OUTLET BE REPLACED IF PLUG OR heater and keep them away from the sides and rear. consistent and accurate temperature reading. heater to turn on up to 16 hours in advance of current preset temperature. OUTLET IS HOT TO TOUCH. time, in increments of 1 hour. 4. DO NOT run cord under carpeting. DO NOT cover cord Tip-Over Shut-Off: 5. If the unit will not start in the digital thermostat mode, with throw rugs, runners, or the like. Arrange cord 3. After the preset length of time has passed, the heater When the unit is accidentally knocked over, it will instantly please make sure the “preset temperature” is higher away from traffic area and where it will not be tripped will automatically turn on at the last mode setting that than the current room temperature. over. PLEA...