Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Dacor Dateigröße: 434.68 kb Dateiname: Unterrichtssprache:

Touch the • FAN key B to turn on the fan. To increase the speed, touch and release the • FAN key until the fan is at the desired setting. To turn off the fan, touch and release the • FAN key until the fan turns off. As you touch and release the FAN key, the fan speed increases, then goes from HIGH to OFF. To decrease the speed, touch and release the • FAN key until the fan turns off. Then touch and release the FAN key until the fan is at the desired speed. Timed Feature Your hood is equipped with a timer to automatically turn off the fan and/or lights after ten minutes. To set the timer: Set the fan to the desired speed and/or lights to the • desired setting. Touch the • TIMED key D (the key will light). The fan and/or the lights will turn off after about ten minutes. To turn off the timer, touch the • TIMED key again. The light on the TIMED key will go out to indicate the timer is off. AUTO-ON Safety Feature To protect the electronic speed control from heat damage, the fan system automatically turns on when the temperature on the control board goes above 140°F (60°C) and the main power switch is on. The fan speed increases with the temperature. To temporarily turn off the auto-on feature: Touch and release the • FAN key until the fan turns off. If the temperature under the hood remains above • 140°F (60°C), the fan will turn on again to protect the electronic speed control. The fan will turn off automatically when the temperature drops below 130°F (54°C). Turning on the Lights Touch the • LIGHTS key C to turn the lights on the high setting. Touch the • LIGHTS key a second time to set the lights to low. Touch the light key a third time to turn the lights off.• Clean Filter Reminder Light After 50 hours of fan operation, the CLEAN FILTER light E will come on to remind you to clean the filters(s). After coming on, the clean filter timer will reset the next time the fan is turned off. Important Operating Tips Always use the fan when using the cooktop or range.• Turn the fan on a few minutes before starting to cook to • establish an airflow pattern in the room. Adjust the fan speed according to the volume and • weight of the food you are cooking. Shut nearby windows and doors, turn off ceiling fans • and close nearby heating and air conditioning outlets to reduce air currents around the hood. Place your largest pots and pans on the back burners • when possible. In the interest of safety, heat oils and fats slowly.• Energy Saving Tips Do not operate the • fan at a speed higher than necessary to remove heat and smoke. Running at too high a speed will draw in air from outside the house, increasing heating and cooling costs. Keep the• filter system and hood surfaces free of grease and grime to improve efficiency. Turn the • fan off as soon as all smoke and odors have been cleared. Select cookware of the proper size, material and • construction for the cooking task. Always use lids on cookware to retain heat and moisture. Minimize the amount of liquid used to cook food.• A B C D E CONTROL PANEL OFF LOW HIGH MEDIUM FAN SPEED INDICATOR Cleaning and Maintenance Cleaning warning To avoid the risk of fire, electric shock or personal injury: Turn off power to the hood at the circuit breaker panel • or fuse box before cleaning. Clean the hood only in the manner specified.• Use only the types of cleaning solutions specified in this • manual. Thoroughly dry the filter(s) immediately after cleaning.• Turn off the cooktop or range and make sure that the • appliance and range hood are cool before cleaning. To avoid damage to the fan, do not reinstall damaged • filters (see page 6 for replacement part numbers). caution Always wipe stainless steel (silver colored) surfaces • with the grain. To prevent scratching, do not use abrasive cleaners or scrubbers on stainless steel or glass surfaces. B A Proper cleaning is necessary to ensure safe operation and maintain hood performance and appearance. The frequency of cleaning should be adjusted according to the type and amount of cooking. Best results will be achieved by cleaning soiled components as soon as possible. Cleaning Stainless Steel Surfaces Clean stainless steel surfaces with a mild solution of detergent or dishwashing soap and warm water. Rinse and dry with a soft, lint-free cloth. You may also use Dacor Stainless Steel Cleaner. Use it according to the directions on the package. Cleaning the Light Lens Use a mild glass cleaner to remove smudges on the light fixture lens. You can also clean it with Dacor Cook Top Cleaning Creme. Use it according to the directions on the package. Cleaning the Filter(s) Clean the filter a minimum of every two months. To help remind you to clean the filter(s), the CLEAN FILTER light will come on after 50 hours of fan operation. See page 4 for instructions on how to reset the light. To Remove the Filter(s): The filter(s) A are located on the bottom of the hood, directly above the cooking surface. Hold the filter in place with one hand and push ba...

Herunterladen

Geben Sie zwei Ziffern: