Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Then position the charcoal filter and align the screw holes, reinstall and fasten two screws. 4) Reinstal I the al um i num filters bac k t o the range hood. NOTE : CHARCOAL FILTER IS CONSUMER PRODUCT MUST BE REPLACED AFTE R 120 HOURS OF USE 0 R EVERY 2-3 MONTHS I. RANGE HOOD OPERATIONS (Normal Switch) For Models H &N&A • • • • • (!) • • • • • • Power Switch Low Speed Medium Speed High Speed Light Switch TURN ON: -Press the speed control (Low Speed, Medium Speed, High Speed)switchto selectthe desired level of power. Once button is pressed, the previous speed mode will be cancel. -Press Ught Switchtoturn onthelights. TURNOFF: - Press the Power Switch to turn off the power. -Press Ught Switchtoturn off the lights. Page 10 J. RANGE HOOD OPERATIONS (LCD Screen) For Models H-L & N-L Clock time setting function on LCD Screen (24 hour setting): (a) After turn on the range hood, the screen on the LCD will show out time of "00:00" and start counting on the time automatically. (b) To setthe clock, pressthe "Setup" buttonforniorethan 2 seconds. Thentime onthe 'hour' section will indicate "00" and start flashing. To adjust an appropriate tim e you can keep pressing the "Speed" button to increase the num ber or stop by taking away yourfinger. (c) Press the "Setup" button again, the time will go intothe 'minute' section and start flashing. To adjust an appropriate time you can keep pressingthe "Speed"buttonto increasethe number or stop by taking awayyourfinger. (d) Press the "Setup" button again, the system will exit from the setting and the m achine wi II show the inserted time (e) If during the set up process, does not press any keyf or m ore then 5 seconds, the system will run out the setting imm ediately and retain on the former time. Press the-On/Off" button: (a) The Range Hood will stop operating 2 minutes after you press the "On/Off" button . (b) The Range Hood will stop operating immediately after you press the "On/Off"button twice. (c) Delay Shut- Off function: This can be selected to allowthe hood to continue running for a few minutes afterturned off. 1. Press the "Setup" button shortly during the operating of range hood. The system will go into the time setting function. The method of Setting up the delay shut-off function isthe same as setting upthe clock on the LCD screen. 2. ¿fter finish setting up the tim e, the LCDscreen will showthetime set and start count down automatically. 3. When the time goes back to "00", the system will cut off the motor power imm ediately, and "Bee" for 5 times to indicate its shutdown. Then the LCD screen will return to normal time. 4. To cancel the Delay Shut-Off function, you can just pressthe "Setup" button again duringthe countdown. Then the LCD screen will return to normal clock function. If press "On/Off "button during this time, the range hood will be shut down immediately. 5. Warning: Turn off the light after setup the "Delay Shut-Off" function. As this function is only will shut down the motor but not the light. Press the "Light" button when the range hood is turned on: (a) Press the light button briefly toturn onthe lights, andthe lighting indicator on the LCD screen will illuminate atthe same time. (b) Press the light button briefly again to turn off the lights, and the light indicator on the LCD screen will go out at the same time. Press the "Speed" button when the range hood is turned on: (a) Press the "On/Off" buttontoturn onthe machine,thenthe motor will run at a High Speed andthe speed indicator onthe LCDscreen will illuminate. (b) Press the "Speed" buttonto changethe speed of thefan. The speed indicatoronthe LCDscreen will change accordingtothe high orlow speedthat is chosen. (c) There will also be a slight decrease in airflowforhoods operated in a recirculation mode duetothe charcoal filter. Page 11 K. TROUBLE SHOOTING AWARNING g/ HAZARD OF ELECTRICAL SHOCK! ■ | Do not perform service on an electrically live system. Disconnect the main electrical supplybefore servicing this device. Touching electrical connectors orothere^osed electrical circuitry inside this range hood when they are energized could result in death, serious bodily injury, or property damage. 1. If the range hood does not operate after installation: - Check if the range hood hasbeen plugged in,make sure that all powerhas been turned back on and all electrical wiring are properly connected. - Check the power connection wiith the unit is connected properly. - Make sure the wiring between the switch board and control board are connected property. ¿.The lange hood vibrates when theblavak on: - The range hood might not have been secured properly on to the wall. - Check weather the motor is secured in place, if not, then tighten the motor in place. - Check weather there is a damaged blower wheel, if so change the blower wheel. ¿.Thebl
Ventilatoren - A (4.72 mb)
Ventilatoren - H (4.72 mb)
Ventilatoren - H-L (4.72 mb)
Ventilatoren - N (4.72 mb)