Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: DeLonghi Dateigröße: 493.73 kb Dateiname: Unterrichtssprache:

13.This heater has hot, arcing or sparking parts. Do not use heater in areas where gasoline, paint, or flammable liquids are used or stored. 14.Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer may cause fire, electric shock, or injury to persons. 15.To prevent overload and blown fuses, be sure that no other appliance is plugged into the same outlet (receptacle) or into another outlet (receptacle) wired into the same circuit. 16.It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord which becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet (receptacle). Worn outlets or receptacles should be replaced prior to further use of the heater. Plugging heater into a worn outlet may result in overheating of the power cord or may cause risk of fire. 17.Do not use an extension cord because the extension cable may overheat and cause a risk of fire. However, if you have to use an extension cable, the cable should be no. 14 AWG minimum size and rated not less than 1875 watts, and has to be used only for supplying power to this appliance. 18.Be sure that the plug is fully inserted into an appropriate receptacle. Please remember that receptacles also deteriorate due to aging and continuous use: check periodically if signs of overheating or deformations are visible on the plug. Do not use a deteriorated receptacle and CALL your electrician. 19.Check that neither the appliance nor the power cable have been damaged in any way dur ing transportation. 20.CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully inserted. 21.Do not cover the appliance while it is functioning in order to avoid overheating with the attendant risk of fire. SAVE THESE INSTRUCTIONS Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is an important safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not ignore the safety purpose of the polarized plug. Voltage Wattage See rating label CAUTION - This heater includes a thermal Cut-Off Overheat Protection System that shuts the unit off if it overheats due to abnormal conditions. If this occurs, the Overheat Safety Light “red” will turn on. Turn the heater “Off”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and resume normal operation. - Always use the heater in an upright position. - Do not use the heater to dry your laundry. To prevent the danger of overheating, never obstruct the intake and outlet grilles. - The appliance must be installed so that the switches and other controls cannot be reached from a person standing in a bathtub or a shower. - The power cord must be replaced only by officially authorized personnel. ELECTRIC POWER CONNECTION This heater must be connected to a properly polarized AC 110/120 Volts household outlet in perfect working condition. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater is plugged in. INSTALLATION This fan heater can be easily positioned on any horizontal support surface in an upright position. MANUAL OPERATION Turn the timer knob to the “manual” position (on models equipped with timer only). - Turning the heater ON: turn the function selector knob to setting , 1, or 2. The yellow pilot light will turn on. -Summer ventilation setting: turn the function selector knob to setting . (The yellow pilot light will turn on). -Minimum power setting (750W): turn the function selector knob to setting 1. - Maximum power setting (1500W): turn the function selector knob to setting 2. - Turning the heater OFF: turn the function selector knob to setting 0. The yellow pilot light will turn off. TIMER OPERATION (ON MODELS EQUIPPED WITH TIMER ONLY) Turn the timer knob to the position desired (1-2-3-4 hours). The appliance will operate for the set period of hours. -Turning the heater ON: turn the function selector knob to setting , 1, or 2. The yellow pilot light will turn on. -Summer ventilation setting: turn the function selector knob to setting . (The yellow pilot light will turn on). -Minimum power setting (750W): turn the function selector knob to setting 1. - Maximum power setting (1500W): turn the function selector knob to setting 2. - Turning the heater OFF: turn the function selector knob to setting 0. The yellow pilot light will turn off. Setting the adjustable thermostat: Turn the thermostat knob in a clockwise direction until it reaches the maximum setting. When the room has reached the desired temperature, slowly turn the thermostat knob counterclockwise until you hear a “click”, and not beyond that point. The...

Herunterladen

Geben Sie zwei Ziffern: