Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sirius Range Hoods Dateigröße: 441.63 kb Dateiname: Unterrichtssprache:

Follow the instructions for cleaning filters in this booklet. Once the grease filters have been cleaned and replaced, reset by pressing the timer button (F). Do not rely solely on this indicator. Generally, the grease filter should be washed on a regular basis to avoid grease filter fires. The blower should be turned on for approximately 5 minutes before cooking in order to establish air currents upward through the hood. Use the low speeds for normal use and the higher speeds for strong odors and fumes. 6 M A I N T E N A N C E M A I N T E N A N C E The hood-fan should provide many years of trouble free service provided it is maintained properly. Cleaning the Filter Clean the grease filter either by carefully hand washing (so as not to damage the filter design) or, preferably in a dishwasher. Depending on use, the filters should be cleaned at least every two weeks in a dishwasher. If a carbon filter has been fitted this must be replaced at least every 6 months as a minimum. Depending on cooking style and nature of cooking (greasy foods, fry’s, curries etc) would probably require more frequent replacement. If odors start to manifest themselves when cooking, it’s time to replace the carbon filter. We suggest you retain a spare set. These can be ordered from the supplier of your range hood. Cleaning the Hood Cleaning of the internal parts should be done with a clean damp (not excessively wet) cloth together with regular household detergent. The external stainless steel elements should be cleaned with a good quality foaming stainless steel cleaner. Read the manufacturers directions. Generally they recommend that the foam be sprayed onto a clean dry cloth and then applied to the stainless steel. Allow the foam to react on the surface for a few minutes and then wipe with a clean dry cloth. On the surfaces that are exposed directly to heat from the cook-top, it is advisable to clean these on a regular basis, to avoid the marks from becoming baked on. Do not under any circumstances use an abrasive type cleaner as this will scratch and damage the stainless steel finish. Light Bulb Replacement (If in doubt, call 866-528-4987) Turn blower and lights off. Make sure the lights are cool. Do not remove the entire fixture (socket) as this is very difficult to reinstall. Visually inspect the light fixture and establish whether the unit has a smooth or “toothed” metal ring. If smooth remove the glass blocking ring by prying out with a sharp, soft instrument such as a toothpick (refer to figure 17). Steel instruments will scratch the surface. Be careful that the lens does not fall out. If “toothed”, place the tip of your finger between the lens and the ring. Making your way around the ring, gently pull outwards until a point is found where the ring pulls off (refer to figure 18). Fixture Lens Glass blocking ring Figure 17 “Toothed Ring” Figure 18 Replace the appropriate bulb. Check parts brochure or specification sheets on our website. ...

Herunterladen

Geben Sie zwei Ziffern: