Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Thermador Dateigröße: 191.04 kb Dateiname: Unterrichtssprache:

Rinse and wipe dry or apply Fantastik® or Formula 409® first to a clean sponge or paper towel and wipe clean. DO NOT USE powdered cleansers or steel wool pads. E Steel Front Panel & Back Wall Stainless Wipe grease accumulation with a paper towel or sponge. Scrape heavy buildup with a plastic spatula. Clean with a soapy sponge; rinse and dry. Always wipe or rub with grain. Wipe with Fantastik® or Formula 409® sprayed onto a paper towel. If grease buildup is heavy, several applications may be necessary. Polish with Revere Ware® Metal Polish or Stainless Steel Magic® and a soft cloth. Remove water spots with a cloth dampened with white vinegar. Use Revere Ware® Instant Stainless Steel Cleaner to remove heat discoloration. To Re-Assemble the Intake 2. Holding the front panel at the top near the sides, 1. Place the filters inside the intake, side by side, on place bottom edge over front lower sill of the in- the slats in front of the back wall. They will lean take. forward and the tops of the outside two will rest 3. Keeping the panel vertical, hook the top of the front against the support bars. panel to the intake. PAGE 5 CARE AND CLEANING OCCASIONAL COOK‘N’VENT® CARE Approximately every six months, remove any food soil that may have collected behind the access panels. The 30" and 36" models have two removable access panels; the 45" model has 3 panels. The access panels to the "clean out" area are beside the blower (cabinet installation) or duct transition (re mote blower installation). See illustration below. The electrical connection box above the clean out area must be accessible for electrical inspection or service only. DO NOT TOUCH OR CLEAN the electrical connection box. TO REACH THE CLEAN OUT AREA Electrical Connection Box: DO NOT OPEN "Clean Out" Area 2 Access Panels (3 in 45") Mounting Channel Wing Nuts VTN600R CABINET BLOWER INSTALLATION AND ACCESS PANELS Cabinet Blower Data Plate Intake 1. Unplug the electrical cord for the Cook‘n’Vent®. 4. Wipe up any accumulated grease or food in the "clean out" area. Use a general household degreasing 2. Unscrew the wing nuts on the top of the access spray or cleaner. Rinse and dry. panels as illustrated above. Lift out mounting channel and panels. 5. Replace the access panels and mounting channel. Tighten the wing nuts securely. 3. Avoid the electrical connection box above the access panels. Be careful when working around the 6. Plug in the electrical cord for the Cook‘n’Vent®. metal framework of the" clean out" area as there may be sharp edges. PAGE 6 CUSTOMER SERVICES WARRANTY THERMADOR ® COOK‘N’VENT ® WARRANTY CVS30R, CVS36R AND CVS45R WHAT IS COVERED Full One Year Warranty For one year from the date of installation or date of occupancy for a new previously unoccupied dwelling, any part which fails in normal home use will be repaired or replaced free of charge. Save your dated receipt or other evidence of the installation/occupancy date. Thermador® will pay for all repair labor and replacement parts found to be defective due to materials and workmanship. Service must be provided by a Thermador® Authorized Service Agency during normal working hours. WHAT IS NOT COVERED 1. Service by an unauthorized agency. Damage or re-3. Damage resulting from accident, alteration, misuse, pairs due to service by an unauthorized agency or abuse, improper installation or the use of unauthorized parts. installation not in accordance with local electrical 2. Service visits to: codes or plumbing codes, or improper storage of •Teach you how to use the appliance. the appliance. • Correct the installation. You are 4. Repairs due to other than normal home use. responsible for providing electrical wiring and other connecting facilities. • Reset circuit breakers or replace home fuses. WARRANTY APPLICATION This warranty applies to appliances used in normal family households. It does not cover their use in commercial situations. This warranty is for products purchased and retained in the 50 states of the U.S.A., the District of Columbia and Canada. The warranty applies even if you should move during the warranty period. Should the appliance be sold by the original purchaser during the warranty period, the new owner continues to be protected until the expiration date of the original purchaser’s warranty period. THERMADOR ® DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state or province to province. SERVICE DATA on the product see the back cover. Keep your invoice For handy reference, the serial tag information has been for warranty validation.To obtain service, see back cover. affixed to the back cover. For location of the serial tag PAGE 7 CUSTOMER SERVICES BEFORE CALLING FOR SERVICE HOW TO OBTAIN SERVI...

Herunterladen

Geben Sie zwei Ziffern: