Stimmen - 5, Durchschnittliche Bewertung: 4.4 ( )

Hersteller: Bionaire Dateigröße: 191.33 kb Dateiname: Unterrichtssprache:

This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse theplug. If it still does not fit, contact qualified personnel toinstall the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY. OPERA TING INSTRUCTIONS (FOR REMOTE Step 1: Insert 2 AAA batteries into the control. Remote Control: Your remote control requires 2 AAA batteries for operation. To install the batteries, simply depress the back of the remote with your thumb on the spot marked OPEN. according to the diagram shown inside. Replace cover. Step 2: Set the fan on a dry level surface. Step 3: Plug cord into any standard 120V AC outlet. Step 4: To turn the fan on press the POWER button on the remote control or on the control panel. Step 5: The speed is adjustable by pushing either the speed button on the remote control, or on the SPEED button on the control panel. Push this button once for LOW, again for MEDIUM, and a third time for HIGH. Push a fourth time to repeat the sequence. To turn the fan OFF, push the OFF button on the remote control, or on the control panel. Step 6: To oscillate the fan head, push the button marked OSCILLATE on the remote, or OSCILLATE on the control panel. Push a second time to stop oscillation. Step 7: This fan comes equipped with a 15 level speed-setting timer. The first time you press the TIMER button it will be set for a 1/ 2 hour. From there you can change the TIMER by pressing the button which will increase one half hour at a time, with the maximum time being 7.5 hours. Step 8: For a natural breeze movement, push the button marked BREEZE on the remote control or BREEZE on the control panel. This will vary the fan speeds faster and slower. By pressing the BREEZE button a second time, you activate the SLEEP setting. This function will be random for the first few hours, but will eventually slow the fan speed down, and when used in conjunction with the timer settings, will ultimately turn the fan off. Note: The time can be used in conjunction with several other functions. For example: SLEEP + 4HR. TIMER causes the fan to gradually slow down over 4 hours and eventually turn off. OPERATING INSTRUCTIONS (FOR NON-REMOTE VERSION) Step 1: Set the fan on a dry, level surface. Step 2: Plug cord into any standard 120V AC outlet. Step 3: Speed Control Instructions A.) To turn the fan on make sure that the TIMER knob on, and that speed control buttons ( I for Low, II for Medium, and III for High) are pressed down. To turn the fan off in this mode simply press the button marked B.) To turn the fan on and use the TIMER, that the TIMER knob is set towards the time that you desire, and that one of the 3 speed buttons ( I for Low, II for Medium, and III for High) are pressed down. See Step 4 for timer use. turn the fan off in this mode, either press the button marked off, or turn the TIMER knob to the position marked Step 4: This fan comes equipped with a 120-minute timer. Turn the TIMER knob clockwise to your desired time setting. Once set, the fan will run until the timer reaches the OFF position. Step 5: To oscillate the fan head, push the button marked OSCILLATE ( ). To stop oscillation, press the button again. CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your Bionaire ® Tower Fan. Please remember: • Always unplug the fan before cleaning. • Clean the fan with a soft cloth moistened with a mild soap solution. • Do not allow water to drip on or into the fan motor housing. •Do not use any of the follow...

Herunterladen

Geben Sie zwei Ziffern: