Stimmen - 6, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Air King Dateigröße: 2.69 mb Dateiname: 469302EN.pdf Unterrichtssprache:

4. Remove the protective plastic film from the hood body and hang hood on the mounting brackets then secure at the anti-tilt locations as indicated in diagram left. Depending on the preferred installation/ducting mode, follow step 5a or 5b below. 5a. Recirculating mode (Fig. a). Using the centre line, secure the ceiling mount bracket to the wall using suitable screws. Attach the recirculating T-piece (optional kit AR600RK for models ERCM9010 and ERCE9020, or AR600RKG for model ERCG9030) to the ceiling mount bracket. Install flexible pipe between T-piece and fan transition outlet. Use cable ties or suitable duct tape to secure flexible pipe to T-piece. NOTE: When installed in recirculation mode, it is recommended to use a carbon filter (included in recirculation kit AR600RK for models ERCM9010AS and ERCE9020AS, or recirculation kit AR600RKG for model ERCG9030AS, refer to page 9) to prevent odours being emitted back into the room. OR 5b. Ducted mode (Fig. b). The canopy rangehood has been supplied with flexible exhaust pipe and duct transition piece, alternatively a 150mm dia. non-combustible flue pipe can be used. Continue the centre line to the ceiling. Attach the ceiling mount bracket on the centre line. Fit preferred flue pipe to the fan transition duct. electrolux e:line rangehoods rangehood installation / installation sequence 5 Rangehood installation 100mm344mm303mm37mm155mm155mm71mm324mm349mm374mm399mm523mmceilingwall mountingbracketsceiling mounted brackethood basetop of hobanti-tilt fixing points168mm168mm(rear view of hood) (rear to wall) (recommended area behind flue cover for power point location) (recommended area behind flue cover for power point location) 100mm(rear view of hood) 102mm525mm46mm359mm303mm37mm155mm155mmceilingwall mountingbracketsceiling mounted bracket168mm168mmanti-tiltfixing points(rear to wall) 138mm138mmlower back edge of glasstop of hob46mm ERCM9010AS ERCE9020AS 100mm344mm303mm37mm155mm155mm71mm324mm349mm374mm399mm523mmceilingwall mountingbracketsceiling mounted brackethood basetop of hobanti-tilt fixing points168mm168mm(rear view of hood) (rear to wall) (recommended area behind flue cover for power point location) (recommended area behind flue cover for power point location) 100mm(rear view of hood) 102mm525mm46mm359mm303mm37mm155mm155mmceilingwall mountingbracketsceiling mounted bracket168mm168mmanti-tiltfixing points(rear to wall) 138mm138mmlower back edge of glasstop of hob46mm ERCG9030AS (a) (b) ERCM9010AS & ERCE9020AS ERCG9030AS electrolux e:line rangehoods installation / using the rangehood 6 Using the rangehood – ERCM9010AS Installation low mediumhighlightauto offOFF NOTE: For ducted mode, we recommend extending flue pipe through the roof to external “china hat” to vent exhaust externally. We do not recommend venting into ceiling cavity. NOTE: Installation must be in accordence with local building regulations. NOTE: To ensure optimum performance of the rangehood, the use of rigid ducting is recommended. ...

Herunterladen

Geben Sie zwei Ziffern: