Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
The hot interior of the heater can produce paraffin smells from polish vapours which may last for a number of hours. »DO NOT ATTEMPT TO REPAIR THE HEATER YOURSELF. In case of breakdown or other failure, switch off the heater at the wail switches and consult your supplier, local electricity company or Applied Energy Products Ltd. Always ensure that the heater is switched off at both wall switches and the fuses removed before any repair is carried out. HOW IT WORKS: This heater stores heat on the off peak tariff, and releases it on demand through the fan. in addition to the storage heater function, a BOOST element is available to produce instant heat when, for example, there is a sudden change in the weather or, in summer when the storage heater has been switched off, the fan heater can be used to provide heat on an occasional chilly day. Note that the fan heater uses normal price electricity and will therefore be more expensive to run than the storage heater alone. FIRST HEATING OF A NEW HEATER: A slight smell shall be produced by the heater during the first few days of operation. ROOMS MUST BE WELL VENTILATED AND YOUNG CHILDREN, CAGED BIRDS, OR PERSONS WITH RESPIRATORY COMPLAINTS MUST NOT REMAIN IN CLOSE PROXIMITY TO THE HEATER DURING THE FIRST 48 HOURS OF THE COMMISSIONING PERIOD. SETTING THE CONTROLS The controls are located under the lockable Hap at the right hand corner of the top panel. STORAGE INPUT: The amount of heat stored each night is controlled automatically, taking into account any residual heat and the ambient room temperature. OUTPUT CONTROLS: FUNCTION 1. The FAN SWITCH offers FAN OFF - (0), LOW FAN (I), and HIGH FAN (II). 2. The BOOST SWITCH offers BOOST OFF (0) and BOOST ON (I). 3. The ROOM TEMR control is set by the user to give the comfort level required, number 1 being the lowest room temperature and can be used for frost protection. OPERATION The ROOM TEMP control overrides the use of the FAN a rid'BOOST SWITCHES, i.e. if LOW FAN has been selected, the ROOM TEMP control will allow the fan to run until the required''comfort level has been achieved. The fan will then automatically cycle ON and OFF to maintain this temperature. If the room feels too warm the ROOM TEMP control should be adjusted anticlockwise, conversely if the room feels too cool it should be adjusted clockwise. LOW FAN should be adequate for normal use with'. HiGHTAtSl'yb'eihg available;for exceptional conditions. The BOOST option is only available when FAN has been; selected;;- When the heater is fully charged, and the BOOST is switched ON, safety devices will allow only '/ the BOOST element to-be activated; When;the-core is partially depleted. When the core is almost fully depleted, the heater will automatically'power the'full BOOST element. If LOW FAN has been operating when the heater automatically powers the full BOOST, HIGH FAN shall be activated regardless of switch setting. CLEANING: To maintain the appearance of the heater, wipe o...
Dieses Handbuch ist für folgende Modelle:Ventilatoren - 703055 (198.65 kb)