Hardware Bag Contents & Tool List 3 II. Attaching the Wheels 3 III. Installing the Tongue & Safety Flag 4 IV. Unfolding & Folding your Burley Cub 6 V. Using the Seat Harness 9 VI. Padded Seat & Shoulder Harness 12 VII. Hitching the Burley Cub to Your Bicycle 13 VIII. Trailer Maintenance and Care 14 IX. Safety Guidelines 16 X. Safety Checklists 21 XI. Parts List & Drawing 22 Warranty 24 Cub Owner’s Instruction & Safety Manual Contents Section Page Introduction 2 I. Hardware Bag Contents & Tool Li

Fork Compatibility................................................................. Frame Features...................................................................... Frame Geometry.................................................................... Shock Setup............................................................................. Optional Derailleur Guard Installation........................... Carbon Frame Instructions................................................ Schematic and Speci

See Chubby diagram on page_____ for part explanations. 4. Push rubber fork booties up off of sliders. 5. Separate sliders from stanchion tubes with a downward tug. 6. Clean the outside of the stanchion tubes and the inside of the sliders with clean rag. 7. Apply thin layer of grease to stanchion tubes and also to the inside of the wiper seal on the sliders. Regreasing Fork Legs 8. Push slider up onto stanchions and reinstall lower slider bolts. Torque to 80 in-lbs. Elastomer Stack and inner Stan

BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING TERMS AND CONDITIONS. Frame: Lifetime Parts: 3 Years Labor: 1 Year Limited Warranty This Limited Warranty applies in the United States and Canada to Products manufactured or distributed by Keys Fitness Products ,L.P. under the Keys Fitness Products (“Keys Fitness Products”) brand name (as used herein, the “Product” or “Products”). The warranty period to the original purchaser is listed above, and commences on the date of ori

The more you ride, the more frequently maintenance will be required. We recommend you spend a little time on regular maintenance tasks. The following schedules are a useful guide and by referring to Part 5 of this manual, you should be able to accomplish most tasks. If you require assistance, we recommend you see a scooter specialist. Tire Pressure: Check tire pressure, inflate to the range recommended on the tire sidewalls. Schedule 1 - Lubrication Pegs: There are many different types of pegs-t

Nos. 5236759/6957926 Pat./Design Pat. Pending Copyright© 2009 CATEYE Co., Ltd. CCAT2W-090526 3 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:( 1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expres

About Thermal Fuses Your Power Wheels 6 volt (4.0 Amp/Hr.) battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, release the button on the handlebar and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shut-downs, do not overload the vehicle by e

Please read this manual carefully and save it for future reference. If you do not understand the information in this manual, or you have a question about your Incite 9i computer that this manual does not cover, consult your Trek dealer. If you have a question or problem that your Trek dealer can’t handle, contact us at: Trek Bicycle Corporation Attn: Customer Service 801 W. Madison Street Waterloo, Wisconsin 53594 trekbikes.com © Copyright Trek Bicycle Corporation (920) 478-4670 2006 All rights