Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Your Specialized SpeedZone® Pro is the first cycling computer to feature wireless digital transmitters for both speed and cadence sensing. Additionally, it incorporates a revolutionary new display screen that allows you to view five functions simultaneously. The SpeedZone® Pro has been designed to provide the best combination of performance, features, durability and ease of use. TOP Button m/h 3 12 9 6 7 2 10 5 4 11 8 1 Current Speed Needle (Backlight/Start/Stop) Analog Clock Average Speed Needle (Flashing) Maximum Speed Needle Speed Indication Bezel Dot-Matrix Display Area Digital Display Area MPH or KM/H Indicator Wheel Option Indicator MODE Button SET Button This illustration describes the screen display and buttons: The following functions are available on your SpeedZone® Pro: • SPEED – Current Speed • AVSPD – Average speed • MXSPD – Maximum Speed • TRIP – Trip Distance • ODO – Odometer (total distance) • ATM – Automatic Start/Timer • TIMER – Stopwatch With Lap-timer • CAD – Cadence • AVCAD – Average Cadence • MXCAD – Maximum Cadence • INT – Interval Timer • DIST – Distance Countdown • ALTI – Current Altitude • ALTI – Altitude Climbed • %GRD – Inclinometer • TEMP – Temperature in °C or °F 2 • Digital 12/24 Hour Clock • Analog Clock This computer also features: • Wireless digital speed and cadence sensing • Five function LCD Display • Second Wheel Option • Easy Calibration Mode • Water resistant housing • 2 Year Warranty • Backlit LCD display The following items are included in your SpeedZone® Pro package: 1. SpeedZone® Computer (1) 2. CR-2032 Lithium Battery (1) 3. Battery Door 4. Mounting bracket (1) 5. Cadence transmitter & mount (1) 6. Magnet with screw (1) 7. Adhesive backed magnet 8. Cadence magnet (1) 9. Cable tie wraps (6) 10. Mounting bracket sizing straps (3) 11. Speed Transmitter and mount (1) BATTERY INSTALLATION AND REPLACEMENT Before using your SpeedZone® Pro Computer you will need to install the battery. Turn the computer over so the display is facing downward. Use a coin to unthread the battery cap from the computer. Install the battery (model CR2032, Specialized P/N 481-3004) with the positive pole (+) facing upward. Carefully thread the battery cap back onto the case with a 1 4 10 3 2 9 6 7 8 5 11 3 coin. (See Figure 3A) If, after battery replacement, the LCD display is blank or shows incomplete digits, turn the computer over and press the "AC" button on the bottom of the case with the tip of a pen or a paper clip. This will clear all the data and re-start the computer. If you need to replace the battery, make a note of your odometer reading and wheel circumference settings before removing it. You can then re-enter the data when you restart the computer. CR2032 battery FIGURE 3A. Replacing the Transmitter Battery The Wireless Transmitter comes with the battery installed at the factory. When the battery in the transmitter needs replacing, it will transmit a signal to your SpeedZone® Pro and the Dot Matrix Display Area will show "LOBAT". If you need to replace this battery, use a coin to unthread the battery cap from the transmitter housing. Install the battery (model CR2032, Specialized P/N 4813004) with the positive pole (+) facing upward. (See Figure 3B) Carefully thread the battery cap back onto the case with a coin. MOUNTING THE SPEEDZONE® PRO: There are two transmitters included with your SpeedZone® Pro. One transmitter is for speed and the other is for FIGURE 3B. cadence. Please note that that they are marked with a WHEEL (speed transmitter) icon or a CRANK (cadence transmitter) icon. It is very important that you mount them in the correct locations on your bicycle. The wireless speed transmitter can mount on the right or the left side of the fork blade. The right side should be used on large frames or when a suspension fork is installed. The optimal distance between the computer and the transmitter is 24 inches (610mm). To reduce signal loss in colder temperatures, the transmitter should be mounted as close to the FIGURE 4. SENSOR PLACEMENT computer as possible. (Maximum mounting distance is 47 inch-es/1200mm). Assemble the transmitter to the mount with the provided screw. Use the tie-wraps provided to position the transmitter on the fork leg. Do not tighten the tie-wraps until final placement of the magnet is correct. (See figure 4). For the best signal FIGURE 5. MAGNET PLACEMENT reception, adjust angle of the transmitter so that it is vertical. It is not necessary, or desirable to aim the transmitter at the computer. Wheel magnets have been provided for both traditional round spokes and bladed (flat) aerodynamic spokes. For wheels with round spokes: Attach the magnet to a spoke across from the transmitter with the magnet screw. The clearance between the magnet and the transmitter should be approximately 1/32"-1/16" (12mm). Tighten the magnet and transmitter. Do not over-tighten the magnet screw. (See figure 5). For wheels with bladed spokes; Use some isopropyl (rubbing) alcohol ...