Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Electrolux Dateigröße: 1.07 mb Dateiname: 95322a4f-2519-9a24-41cf-421584aac5d5.pdf Unterrichtssprache:

All electrical installations must be carried out by a petent electrical contractor, to IEE wiring »„¿illations. A. FOR THE INSTALLER Installation of the hob unit To install the hob unit a cut out in the work top has to be provided according to the sketches indicated below. The buitl-in hob unit must fit in the aperture so that the automatic plates or the quick action cooker plates are positioned in the front. No support strips should remain underneath the cut out in the work top; these should be sawed back to come in line with the edges of the aperture. The voltage across the elements is placed from 25 to 35 mm. With stronger work tops the aperture has to be enlarged accordingly where the cooker plates are situated. approx partition board or cupboard Ik' T wall wall | ]) If the extension piece of the unit or the control panel is situated on the right, this width can be reduced to 25 minimum. Fig. 4 Minimum distances to surrounding walls. wall Fig. 5 EKMUE 4.77 In case a cupboard with a top is to be fitted underneath the work top (or a stove for that matter) an additional cut out has to be provided to cover the area of the cooker plates. Furthermore, it must be ensured that no inflammable objects or articles which catch fire easily or which are deformable, are placed directly below the cooker plates. . _ =©000© Positioning of the cooker plates in relation to a cupboard or stove to be fitted underneath the unit. Fig. 6 The enclosed durable, elastic and heat-resistant seal strip is to be laid into the hob edge so that only a small overlap remains towards the contact surface (see fig. 7). Before placing the hob unit in the work top the screws of the clamping strip have to be unscrewed (fig. 8 a and 8 b). Afterwards the hob has to be srewed into the work top Please make sure that the work surface and also the hob unit are mounted level. Only then, for instance, will you get equal distribution of Fig. 8 a and 8 b Description of circuit connection for hob and stove, control panel respectively. The circuit connection between the cooker plates and the device which they are being combined with, is provided through flexible plug-contacts (“Wielandstecker“). These plug-contacts are mar- according to figs. 8 a and 8 b. The screw caps which are used to hold the work surface have to be hand tightened only. the fat in the pan, because the cooker plates in themselves are manufactured absolutely level. ked with lines which have to meet up if the parts have been joined together correctly. The earth wires of the cooker plates have to be connected up with the earth wires of the switch strip; to be tightened with the enclosed special screws. Final Adjustment of the Cooker Plates If not already the case, the cooker plates can be made level by finally adjusting them with the adjusting screws (1-2-3) which can be reached from underneath (fig. 9). Connection of two built-in hob unites Fig. 10 SI m 1 Rail to give protection...

Herunterladen

Geben Sie zwei Ziffern: