Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Otherwise, Gand 9.0 flash in the hotplate display; the heat setting 9.0 is then set automatically. The powerboost function can be activated for Group 2 at any time. (See illustration) ............ ............ .......... To activate 1. Select the required hotplate using the corresponding symbol ‰. 2. Press the Gsymbol. The function has been turned on. To deactivate Select the hotplate by pressing the corresponding symbol ‰ and then press the Gsymbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. A hotplate should switch off automatically. Enter the cooking time for your dish. The hotplate switches off automatically after the time that is set has elapsed. Setting procedure The hob must be switched on. 1. Select the hotplate and the required heat setting. 2. Touch the 0 symbol twice. 0.0, min and qlight up in the display of the selected hotplate. If you touch the ° symbol, an explanation of how to select the cooking time appears in the display. 3. In the next 10 seconds, set the desired time using the 0 to 9 symbols or the + and -symbols. Then touch the 0 symbol to activate the function. + symbol: 30 minutes -symbol: 10 minutes After a few seconds, the cooking time begins to elapse. The cooking time for the selected hotplate appears in the display. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate and then press the 0 symbol twice. Change the time using the 0 to 9 symbols or with the + and symbols. To cancel the time, programme to zero with the 0 or symbol until 00 appears. Notes ¦ Select a hotplate to check the remaining cooking time. ¦ Any cooking time can be programmed for up to 99 minutes. ¦ When the ° symbol is pressed and the time has not been set, an alert will appear on the display. Cancelling the time for a hotplate using the frying sensor function When cooking using the frying sensor, the programmed cooking time starts to count down once the cooking zone has reached the required temperature. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep sounds and 0.0 appears on the hotplate and 00 appears on the time program function display for 10 seconds. When the 0 symbol is pressed, the display turns off and the beep ends. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program The hob must be switched on. 1. Press the 0 symbol. U, and 00:00 appear on the time program function display. 2. Set the required time with the 0 to 9 symbols or with the + and -symbols. On the display, the setting will be programmed from right to left. + symbol: 10 minutes -symbol: 5 minutes The cooking time begins to count down after a few seconds. Changing or cancelling the time Once the time has elapsed Press the 0 symbol. Change the time by pressing the 0 to 9 Once the time has elapsed a beep will sound. 00:00 appears symbols or + and -symbols. To cancel the time, programme it in the time program function display. When the 0 symbol is to 0 with the 0 to 9 symbols or with the + and -symbols. pressed, the displays turn off and the beep goes off. Note: When the ° symbol is pressed and the time has not been set, an alert will appear on the display. Cleaning lock Cleaning the control panel while the hob is on may change the control panel can now be cleaned without risk of changing the settings. settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob mayPress the >D symbol. An alert will appear on the display. The be switched off when desired. control panel is locked for 20 seconds. The surface of the Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. F8 and the residual heat selected power level (from 1 to 10 hours). indicator qH/ph flash alternately on the hotplate display. Settings The device has several basic settings. These settings can be changed. Indicator Function Language English* German French Dutch Italian Portuguese Spanish Danish Swedish Norwegian Finnish Russian Polish Turkish Greek Power levels S ‚. * Beep On* Off Power limit from 1000 W to 9500 W. Increasing the setting increases the powe...