Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Consisting of two independent zones The flexible zone can be used normally as two independent hotplates. How to activate See “adjusting the hotplate“ section. As one hotplate To use the entire hotplate with all individual zones. How to activate The hob must be switched on. 1. Place the cookware and press the .symbol. The N. indicator lights up. The flexible zone has been activated. 2. Then select the desired power level by sliding your finger over the programming zone until the desired power level lights up. The flexible zone is switched on. Changing the power level Select the flexible zone by pressing the .symbol and change the power level in the programming zone. Adding more cookware Press the .symbol. The new pan will be detected and the previously selected power level will be maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Set it to ‹ in the programming zone. Return to using as two hotplates Select one of the hotplates in the flexible zone. Note: When a hob is switched off and later switched on again, the flexible zone will again be used as two hotplates. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childproof lock. The range must be turned off. To activate: press and hold the #symbol for approx. 4 seconds. The @ symbol lights up for 10 seconds. The range is locked. To deactivate: press and hold the #symbol for approx. 4 seconds. The lock is now deactivated. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Usage restrictions This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use. (See illustration). Otherwise, › and S flash in the heat setting display; the S heat setting is then set automatically without activating the function. ............ ............ ........ Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Note: The greatest amount of power supplied in the flexible zone is obtained by placing a pan in the centre of the zone, as indicated in the Flexible zone chapter. To activate 1. Select the power level S. 2. Press the programming panel located above the @› symbol. The function has been activated. To turn off Press the programming panel located above the @› symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Programming the cooking time. The hob must be switched on: 1. Select the hotplate and the desired power level. 2. Press the 0 symbol. The xindicator on the hotplate lights up. ‹‹ is displayed on the time program function display. To select another hotplate, press the 0 symbol several times until the xindicator for the desired hotplate lights up. 3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, from left to right: 1, 2, 3, etc., up to 10 minutes. .... .... After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming panel, the cooking time is reduced by one minute, if it is held down the time is automatically reduced to one minute. If the previous setting from 6 to 10 is pressed in the programming panel , the cooking time is increased by one minute, if it is held down the time is automatically increased to 99 minutes. Changing or cancelling the time Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the programming panel, or set to ‹‹. Once the time has elapsed The hotplate switches off. An audible signal sounds and ‹‹ appears in the time program function display for 10 seconds. The x indicator lights up. Pressing the 0 symbol turns off the indicators and stops the signal. Notes ¦ If a cooking time has been programmed in several zones, it can be set to display all time values. To do this, press the 0 symbol several times until the x indicator for the required hotplat...