Hersteller: Bosch Dateigröße: 316.58 kb Dateiname: Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

It will return to position 9.The indicator lights up. The function has been activated. To deactivate Use the control for the required hotplate to select any power level other than 9. The indicator light switches off. The function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Automatic time limitation If the hotplate is used for prolonged periods and the settings are not adjusted, the automatic time limitation function is activated. The hotplate stops heating. The Powerboost function indicator is flashing When the control is turned to position 0, the indicator switches off. The hotplate can now be reset. When the time function is activated, it is governed by the selected power level (from 1 to 10 hours) . Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it. Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging. Do not use: . Abrasive products . heavy- duty cleaners, like oven sprays and stain removers . Pads that may scratch . High- pressure or steam cleaners Glass scraper Remove dried-on food remains using a glass scraper. 1 Release the scraper safety catch 2 Use the blade to clean the hob surface Do not attempt to clean the hob surface with the base of the scraper. This could result in scratching. a Risk of injury!! The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found. Care of the appliance Apply an additive to protect and preser ve the hob. Follow the advice and warnings provided with the product. Hob frame In order to avoid damage to the hob frame, follow the indications below: . Use only slightly soapy hot water . Do not use sharp or abrasive products . Do not use a glass scraper Cleaning the control panel Use only slightly soapy hot water. Do not use abrasive or corrosive cleaning products. Do not use glass scrapers. The control panel could be damaged. Lemon and vinegar are not suitable for cleaning the control panel. Dull stains may appear. Fixing malfunctions Malfunctions are usually due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been cut Use other electrical appliances to check off. whether there has been a power cut. The appliance has not been connected Check that the appliance has been connected in accordance with the connection diacorrectly according to the connection diagram. gram. Electronic system malfunction. If in the above checks, the malfunction is not resolved, contact the Technical Assistance Service. The indicators for the Powerboost An internal error has occurred in the Unplug the hob from the mains. Wait a few secfunction are flashing. hob's working. onds before connecting it again. If the warning persists, contact the Technical Assistance Service The hob is not connected properly. Unplug the hob from the mains. Check the connection diagram and connect it again correctly If the warning persists, notify the Technical Assistance Service. The hotplate has overheated. Turn the control to the 0 setting. Switch on the hob again. The Powerboost function and hot- The hotplate has been working non- The automatic time stop has been activated. plate indicators are flashing. stop too long at a high power level. Turn the control to the 0 setting. Switch on the hob again. Normal noise while the appliance is working Induction heating technology is based on the creation of electromagnetic fields that generate heat directly at the base of the pan. Depending on how the pan has been manufactured, these may produce certain noises or vibrations such as those described below: A deep humming sound as in a transformer This noise is produced when cooking on a high power level. It is caused by the amount of energy transferred from the hob to the pan. The noise disappears or becomes faint when the power level is lowered. A low whistling sound This noise is produced when the pan is empty. It disappears when water or food is added to the pan. A crackling sound This noise occurs in pans which are made from different materials superimposed on one another. It is caused by the vibrations that occur ajoining surfaces of the different superimposed materials. The noise comes from the pan. The amount of food and cooking method can var y. A high-pitched whistling sound This noise is produced mainly in pans made from different materials superimposed on one another, and it occurs when such pans are heated at maximum power on...

Dieses Handbuch ist für folgende Modelle:
Kochfelder - VI260134/20 (316.58 kb)
Kochfelder - VI270114/20 (316.58 kb)

Herunterladen

Geben Sie zwei Ziffern: