Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically Enter the time period for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the required hotplate and power level. 2. Press the 0 symbol twice. ‹‹ y _ _ light up on the time function program display. 3. In the next 10 seconds, program the required time using symbols 1 to 9. The cooking time starts to count. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep is heard and ‹ . ‹ appears in the hotplate and the time programming function display shows ‹‹ for 10 seconds. When the 0 symbol is pressed, the displays turn off and the beep goes off. Changing or cancelling the time Select the hotplate and press the 0 symbol twice. The _ _ and r displays appear Change the cooking time using symbols 1 to 9 or press 0 to cancel the time. Notes ¦ If a cooking time has been programmed, the display always shows the time of this function. To check the cooking time remaining in a hotplate, select a hotplate and press the 0 symbol twice. ¦ If a time has been programmed for several hotplates, the time of the selected hotplate is always shown. ¦ Any cooking time can be programmed for up to 99 minutes. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" . Note: The cooking time can be changed or cancelled for any hotplate: Press the 0 symbol several times until the $ indicator of the required hotplate lights up. Adjust the cooking time with symbols 1 to 9 or deactivate with the symbol 0. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up in the time program function display. 2. Set the required time using symbols 1 to 9. The time starts again after a few seconds. Once the time has elapsed Once the time has elapsed, a beep will sound. ‹‹ and Uare displayed in the time program function display. After pressing the 0 symbol, the indications turn off. Changing or cancelling the time Press the 0 symbol, the U indicator lights up. Change the time using the 1 to 9 symbols or press 0 to cancel. Cleaning lock function Cleaning the control panel while the hob is on may change the Note: The lock does not affect the main switch. The hob may settings. be switched off when desired. In order to avoid this, the hob has a cleaning lock function. Press the >D symbol. A signal sounds. The control panel is locked for 35 seconds. The surface of the control panel can now be cleaned without risk of changing the settings. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. The ”‰ symbol and the residual selected power level (from 1 to 10 hours) . heat indicator oe/ • flash alternatively in the display. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Deactivated.* ‚ Activated. ™ . Sound signals ‹ Confirmation beep and error signal deactivated. ‚ Only confirmation beep deactivated. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut- off time. ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ = 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™ S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected. * ‚ Limited: The hotplate will only remain selected for 10 seconds. ™ ‹ Return to basic settings ‹ Personal settings. * ‚ Return to factory settings. *Factory settings Accessing the basic settings 4. Next select the setting required with symbols 0 to 9. The hob should be switched off. 1. Turn on the hob with the main switch. 2. In the next 10 seconds, hold down the 0 symbol for 4 seconds. ™‚ is displayed on the left of the screen and ‹ on the right. 3. Press the 0 symbol until the indicator for the required function is displayed. 5. Press the 0 symbol for 4 seconds. The settings will have been properly saved. Leaving the basic settings Turn off the hob with the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you...