Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Amana Dateigröße: 2.24 mb Dateiname: Unterrichtssprache:

The single lines indicate that only the inner element is being used. OFF MED LO LO MED Dual Radiant Element Control Knob To operate the inner and outer element push in and turn the control knob to the double line settings. To operate only the inner element push in and turn the control knob to the single line settings. The dual radiant element will cycle on and off to maintain desired heat setting. When finished, turn control knob to OFF position. 11 RS2420002 Rev. 5 Operating Instructions Operating Halogen Heater Operate the halogen heater element by pushing in the control knob and turning to desired setting. The control setting cycles the element on and off to maintain heat. Turn control knob to OFF position when finished. Operating 10-Position Halogen Element Push in and turn control knob to desired setting. There is a distinct click position for all 10 positions. The 10 position switch allows a precise constant amount of heat to radiant from the element. Therefore, the same heat setting can be repeated and maintained. OFF LO 2 3 4 5 6 7 8 9 10 - Position Haloringa Element Control Knob NOTE: The halogen element will not be illuminated at settings LO through 3. The higher the selected temperature, the brighter the illumination from the element. The halogen element will not cycle unless it has been left at a high heat setting for an extended amount of time without a pan in place or if the pan has boiled dry. Turn control to OFF position, when finished. Surface Element Hot Indicator Lights Some cooktops feature four surface element indicator lights, some feature just one. On single indicator models, the hot indicator light glows red when any of the surface elements are turned on. On multiple light models, the hot indicator light glows red when the corresponding element is turned on. For all models, the surface indicator light remains on until the surface element reaches a safe temperature. The four hot indicator lights featured on some models are located in the center of the control panel. The hot indicator lights glow red when the corresponding element is turned on. The light remains on until the corresponding element has cooled. Changing Fuses-Canadian Models Before Date Code 2/96 The cooktop fuse box is located at the end of the power conduit. Turn the fuses counterclockwise to remove. Replacement fuses must have the same rating. 20 AMPS 20 AMPS Front Back Burners Burners 20 AMPS 20 AMPS Fuse Box Units made after 2/96 do not have fuse box assembly. Cleaning Do not clean cooktop until it cools. Sudden temperature changes can crack the cooktop surface. Washing the cooktop with hot, soapy water after each use minimizes the need for heavy cleaning. To preserve the original appearance, rinse and wipe the surfaces dry after washing. Wipe up marinades, fruit juices, vinegar and milk spills to avoid permanent stains. These materials contain acids and cause discoloration and permanent staining. DO NOT touch any portion of the cooktop when it is hot. Wait and wipe up spills after the cooktop is cool. RS2420002 Rev. 5 12 Troubleshooting Procedures Cleaning Glass/ Ceramic Cooktop Problem Cause To Prevent To Remove Brown streaks and spots. Cleaning with a sponge or dishcloth that has been used for other kitchen cleaning tasks and may contain soil-laden detergent water. Use Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking soda only with a clean, damp paper towel. Use a light application of Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking soda with a clean, damp paper towel. Blackened burned on spots. Spatters or spillovers onto a hot cooking area. Accidental melting of plastic film, such as a bread bag or similar item. Select correct heat settings and large enough cookware to eliminate boilovers and spatting. Whenever possible, wipe spatters and food spills as they occur. Use a spatter shield available in houseware departments and some supermarkets. Do not put plastic items on or near warm cooking areas. Use Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking soda with a damp paper towel to remove as much burn on as possible. Use Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking soda with non-impregnated plastic nylon pads such as SCRUFFY scouring brush, TUFFY plastic meshball. If burn-on persists, carefully scrape with a single edge razor blade. Hold blade so entire length of edge is on cooktop at a 30° angle. Use a blade holder. Fine “brown/gray lines (tiny Coarse particles (salt, In areas where there is an Tiny scratches are not scratches or abrasions sand, sugar, or grit) abundance of sand or removable but can be which have collected soil). caught between bottom of cookware and cooktop that are not removed before cooking. Using incorrect cleaning materials dust, be sure to wipe cooktop each time before using. Daily use of Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking soda. minimized by continual use of Elco, Bon Ami, Soft Scrub, Cooktop Cleaning Creme or baking ...

Herunterladen

Geben Sie zwei Ziffern: