Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Indesit Dateigröße: 1.41 mb Dateiname: 5deee316-3968-426d-8fc6-2c920bf5af8d.pdf Unterrichtssprache:

• Preheat your oven to 350°R Place the griddle on the upper rack in your oven. • Bake griddle for 1 hour at 350°F, then turn oven OFF and let cool before removing. • The surface may appear to have a tacky feel to it from this seasoning process. If desired, wash the griddle in hot soapy water, rinse well, and dry completely. After each use: • To prevent rusting, store in a dry place and keep uncovered. • After each use, clean with a stiff brush and hot water only. • DO NOT CLEAN GRIDDLE iN DISHWASHER. • Dry immediately and apply a light coating of vegetable oil to griddle before storing. Using the Griddle: • Place either side of the griddle centered over the left side gas burners. • Preheat the griddle for 5 minutes on medium to medium low setting. Slow preheat ensures even heat distribution during the cooking process. • DO NOT preheat the griddle on Hi setting. Preheating on Hi may warp the griddle and prevent even heat distribution. Always place the griddle on the grate before turning on the burner. Always use potholders to remove the griddle from the grate. Allow the griddle to cool before removing. Do not set hot griddle on surfaces that cannot withstand high heat such as countertops. Be sure the griddle is positioned correctly and is stable before use to prevent hot spills and possible burns. Before Setting Surface Controls Locations of the Gas Surface Burners The SIMMER burner (5000 BTU) is best used for simmering delicate sauces, etc. This burner is located at the right rear burner position on the cooktop. The STANDARD burners (7000 BTU or 9500 BTU) are used for most surface cooking needs. These burners are located at the left front and left rear positions on the cooktop (and there is one more standard burner located at the center rear position on the 36" cooktop models). The POWER burner (17200 BTU)is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. This burner is located at the right front position on the cooktop. The BRIDGE burner is best suited when using rectangular or long shaped cookware. The left rear (7000 BTU) and left middle (7000 BTU) are combined and controlled by the same control knob. The left front burner (7000 BTU) may also be added for a total of 3 burners (21000 BTU). Assembly of the Surface Burner Heads, Burner Caps and Burner Grates It is very important to make sure that all of the 30"CooktopLayout Surface Burner Heads, Surface Burner Caps and Example of Burner Assembly Surface Burner Grates are installed correctly and at the correct locations. Match letter located 1. Be sure to follow the installation instructions @ .... when installing your new cooktop. 2. Remove all packing tape from cooktop. Remove Burner Caps and Burner Heads (See Figure 1). _ Head 3. Discard all packing material located under all _-_ BuHer Heads (if applicable). 36"CooktopLayout 4.To replace Burner Heads & Caps, match the letters located under center of Burner Caps with the le...

Herunterladen

Geben Sie zwei Ziffern: