Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Gaggenau Dateigröße: 247.52 kb Dateiname: 22-45262.pdf Unterrichtssprache:

Cooktop sides lay directly on edge of countertop. Formed front-edged countertops must have molded edge shaved flat 3/4" from each front corner of opening. Tile countertops may need trim cut back 3/4" from each front corner and/or rounded edge flattened. If the existing cutout width is greater than 30 1/16", reduce the 3/4" dimension. Grounded Junction Box in adjoining cabinet Do not pinch the power supply cord between the range and the wall. Do not seal the range to the side cabinets. *Note: 24" min. clearance between the cooktop and the bottom of the cabinet when the bottom of the wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" stainless steel, 0.024" aluminum, or 0.020" copper. 30" min. clearance when the cabinet is unprotected. **Note: Minimum cutout depth is increased to 24" with optional backguard. tNote: To avoid cooktop glass breakage for cutout width of more than 30 1/16", make sure appliance is centered in the counter opening while pushing into it. ttFor cutouts below 22 7/8”, appliance will slightly show out of the cabinet. +Allow at least 20" clearance for door depth when it is open. Sears Contract Sales Because of our continuous program of product improvement, Sears reserves the right to change materials and specifications without notice. Consult installation instructions packed with the product for final dimensional data. For complete warranty information, contact your local Sears Contract Sales Account Manager. Listed by Underwriters Laboratories All ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. 22-45262.PDF Effective 05/31/06 Rev. 1...

Herunterladen

Geben Sie zwei Ziffern: