Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Fagor America Dateigröße: 897.4 kb Dateiname: 2008a1a1-8e0a-4e89-99a4-e9abcd0e6ac6.pdf Unterrichtssprache:

• Do not allow children to use this appliance unless closely supervised by an adult. Children and pets should not be left alone or unattended in the area where the appliance is in use. Never allow children to sit or stand on any part of the cooktop. • Do not store flammable materials in or near the cooktop. • Do not use water on a grease fire. Smother fire or use a dry chemical or foam-type extinguisher. • Never use the cooktop to warm or heat a room. • For personal safety, wear proper clothing. Loose fitting garments or shirts with hanging sleeves should never be worn while using this appliance. • Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot heating elements. Do not use a towel or other bulky cloth. • Use proper pan size.This appliance is equipped with one or more surface units of different sizes. Select pans with having flat bottoms large enough to cover the surface unit heating element. The use of undersized pans will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper coverage of pots and pans to burner will also improve efficiency. • Never leave surface units unattended at high heat settings. Boi lover causes smoking and greasy spillovers that may ignite. • Make sure reflector pans or drip bowls are in place. Absence of such may subject wiring or components underneath to damage. • Protective Liners. Do not use aluminum foil to line surface unit drip bowls or oven bottoms, except as suggested in the manual. Improper installation of these liners may result in electric shock, or fire. • Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed pots and pans are suitable for range-top service due to the sudden change in temperature, which may result in breakage - see page 15 for reference. • To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the cookware handles should be positioned so that they are turned inward, and does not extend over adjacent surface units. • Do not soak removable heating elements. Heating elements should never be immersed in water. • Do not cook on a broken cooktop. If your cooktop should break or crack, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately. • Clean cooktop with caution. Be careful to avoid steam burns if a wet sponge or cloth is used to wipe spills on a hot cooking area. Some cleaners can produce noxious fumes if applied to a hot surface. 5 SENSOR DESCRIPTION SENSOR DESCRIPTION VFA-70 S Control sensors MULTI-RING HOTPLATE (2,7 kW) 0,75 Kw 0,9 Kw 1,05 Kw Sensors Control points - Double hotplate - Multi-ring hotplate Double hotplate/ Multi-ring hotplate sensors Hotplate pilot light Selected power display Residual heat display Multi-ring Hotplate Medium Hotplate Small Hotplate Power sensors from: 0 to 9 from: 9 to 0 Blocking control point Blocking sensor ON/OFF Sensor 6 SENSOR DESCRIPTION SENSOR DESCRIPTION Control point Sensor double heat source VFA-78 S Control point Heat source for dishes Heat source position indicators Indicator display of selected power Indicator display of residual heat Heat source power selection sensors from: 0....9 from: 9....0 Blocking control point Blocking sensor Sensor ON/OFF 7 DESCRIPTION OF TIMER DESCRIPTION OF TIMER Models with this type of timer control can be assigned to any heat source, and can be timed between 1 and 99 minutes. The assigned heat source will turn off once the time chosen by the user has elapsed. VFA-78S Multi-ring Control Sensors VFA-70S 8 DESCRIPTION OF TIMER DESCRIPTION OF TIMER Steps for setting and Timing the Heat Source With the radiant cooktop switched on: 1 Choose the required power of the heat source that you wish to time. 2 Switch on the timer by touching the sensor +. Once on the timer display appears and appears in the display of each heat source. 3 Touch the + of the chosen heat source. will flash in the display of the chosen heat source. The timer has now been set to the chosen heat source. 4 Choose the desired time pressing + which corresponds to the timer. Once these steps have been carried out the setting sequence of the heat source timer ends. If between each step there is a pause of over 10 seconds or if you do not choose a length of time, the timer will automatically switch itself off Once the timer has been set to a heat source and the time has been chosen, the timer will gradually count down the time and will indicate the time remaining to switch off the heat source. During the timing, in the heat source display you can see the selected power and the (indicating that this heat source is timed) alternatively. Once the time has passed the heat source will switch itself off, the control will release a warning acoustic signal and will flash in the timing d...

Herunterladen

Geben Sie zwei Ziffern: