Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Crane Dateigröße: 885.62 kb Dateiname: Unterrichtssprache:

Shake vigorously again and empty the water. Rinse the Water Tank a few times to get rid of the vinegar smell. 4. Make the same white vinegar water solution and pour into the Water Basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe dry with a clean soft cloth. 5. Wipe the exterior surfaces of Water Tank and Water Basin with a soft, dry cloth. NEVER IMMERSE WATER BASIN IN WATER. END-OF-SEASON MAINTENANCE 1. Remove the Water Tank from the Central Body. Empty the water from the Water Tank and the Water Basin. 2. Disinfect Water Tank and Water Basin with the white vinegar and water solution described above. 3. Make sure that Water Tank has air dried without the Water Cap secured. 4. Make sure the Water Basin and Water Tank are completely dry before end-of-season storage. Store the humidifier in a cool dry place. 8 Water Level Sensor To clean the water level sensor unscrew or snap off, depending on style, the plastic cap from the pin. Remove the water level sensor float and clean by wiping the parts with a soft damp cloth. Replace the parts by first putting the water float onto the pin and rescrewing the plastic cap onto pin. TROUBLE SHOOTING CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If the humidifier continues to not operate please call our service center (1-888-5990992). Problem Solution Humidifier power light is staying red and not turning green: Humidifier is working than stops: ■ Ensure that the water tank cap is secured properly to water tank. ■ Empty out water in water basin. Place filled water tank on to empty water basin. ■ Clean Water Level Sensor. If humidifier does not work at all: ■ Ensure unit is properly plugged into a power outlet. ■ Check that the Control Knob is turned to the ON position. ■ If Power On indicator light does not come on, contact Crane service center. If there is a strange odor: ■ Clean the Water Tank with the water and vinegar solution and rinse with clean water. ■ Leave the empty Water Tank open for some time (without the Water Tank Cap attached) in a cool place. The power light is green, but there is no mist being emitted: ■ Check that there is water in the Water Tank. ■ Make sure that nothing blocks the Mist Output Slots. ■ Check that the Fan Vent on the bottom of the humidifier is not blocked. ■ Empty the humidifier and rinse the Water Basin with cool tap water and allow to dry for 15 to 30 minutes before resuming normal operation. ■ Check for possible mineral deposits on the Water Level Sensor or the Nebulizer. White dust appears and settles outside the humidifier: ■ Area tap water may have too many minerals. Change to filtered or distilled water or purchase and add a Crane filter to the humidifier unit. 9 STORING YOUR HUMIDIFIER Allow the humidifier to dry completely before storing. Store the humidifier in a dry location. Do not place any heavy items on top of humidifier during storage as this may result in pos...

Herunterladen

Geben Sie zwei Ziffern: