Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
To remind yourself when you put the ISS into operation, please check the current month on the stamp and write the current year on the line provided. Water Quality Maintenance The Ionic Silver Stick® (ISS) keeps the water free of microbial growth. The ISS uses the anti-microbial effect of silver to prevent the growth of microbes in the water base. It begins to function as soon as it comes into contact with water, even if the unit is switched off. The Ionic Silver Stick should be changed every year. QUICK SET UP GUIDE 2055A QUICK OPERATION DESCRIPTION 2055A A B C D E A Rotary switch On/Off B Position Off C Normal mode D Night mode E Operating light and Automatic Shut-Off «Tank empty» Indicator 1 2 3 4 5 6 7 8 9 10 RECOMMENDED TO CLEAN WITH EZCal TROUBLE SHOOTING Switch off the appliance and unplug it from the socket before cleaning it. Clean the water tank and the base regularly. Use water only, no detergents. For best results use EZCal custom cleaning agent for AIR-O-SWISS products to remove deposits from the water base regularly. Do NOT run the unit when using EZCal. This can cause damage to the product and voids the warranty. Do not submerge the main body in water! The cleaning indicator still appears on the display after cleaning. To reset hold down the two hygrostat buttons until the clean light stops flashing. Thoroughly rinse the base with tap water and make sure no EZCal residue remains in the base! What is EZCal? EZCal from AIR-O-SWISS is an easy and safe cleaning and descaling agent recommended for all humidifiers. It cleans mineral build-up in the water base. There is a sample of EZCal included in the packaging of your humidifier! Only use 1 packet for 32oz of water. Do not change the ratio. Thoroughly rinse the base with tap water and make sure no EZCal residue remains in the base. Instructions for use are on the packet. Please note: EZCal from AIR-OSWISS is the only recommended cleaning and descaling solution. Do NOT use any other cleaning solutions since it can damage the product. Any use of cleaning solutions apart from EZCal will void the warranty. EZCal descaling agent is available at selected retail stores and online at FURTHER INFORMATION DO NOT DISCARD! Save for future reference. Please read the manual or check our website for further information. ACID 30 min 140°F / 60°C If there is no water left in my water tank, for how many hours will the water in the base last? • An exact answer cannot be given for this as there are many factors that depend on how long the water will last for. It all depends on the size of the room, if it is very dry, among other things to know how quickly water will evaporate into the air. If you notice that there is no water left in the water tank, it is always a good idea to refill the tank to have extra water available. Red LED light is illuminated – what does it mean? • The red LED light on the appliance shows you when the unit should be refilled with water. If the water level falls below the minimum level, the appliance automatically switches off. The red LED appears on the display. When water is added, the red LED changes to green and the appliance continues operating. Please note: When lifting the upper part off the housing, the appliance also switches off. In this case, the red LED will also appear on the display. Only when the upper part is replaced on the base does the red LED (E) disappear and the appliance resumes operation. I fill the water tank, and when I place it back on the unit all of the water goes into the base. Why is that? • Water is needed in the base of the unit for the removal of particles from the air, and for the humidification of the air. The first time the tank is filled up and placed on the unit, all of the water will go into the base of the unit. The water tank acts as a reserve, and may be filled up a second time to have extra water available. Is it ok to put my humidifying discs in the dishwasher? • The manufacturer of this appliance does NOT recommend it. The discs can only be placed in a dishwasher where the temperature is no greater than 131°F / 55 .C. If the temperature is any hotter than this, the discs will melt. Place the plates in a sink filled with warm water and white vinegar or EZCal and either let them soak or spin the plates in this solution. Or, add white vinegar or EZCal to the water in the base of the unit and let the unit run for an hour to clean the plates. It is good to have calcium deposits built up on the plates as it will capture more particles from the air and add more moisture to the air. For troubleshooting, see chapter «Troubleshooting». Humidity level is not changing or does not reach the desired humidity level • If the water tank needs refilling more than once per day, the unit is working properly and the climatic condition in the room has an influence on the humidity. Reasons for low humidity level: • air circulation is very high (air is fully exchanged several times pe...