Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Right hinge is standard. • Comes standard with birch veneer door. • Electrical requirements for E-342: 115/120v, 15amps. Pigtails are provided in bottom of wireway for hookup to supply line. Make entrance into knockouts provided in top and bottom of wireway through left-hand vent hole. • Electrical requirements for NE-342: The unit does not require electricity, it is non-electric. • Recommended to attach 2” x 4" cleats to studs, level with the bottom of opening (for support when recessing unit). • Door opens approximately 180°. Allow at least 16” to the side of the unit for door to swing open (door hinges on full length piano hinge) See page 2 for additional information 3 7/8'\ ?1/2" Side View (not to scale) \ / Door \ Cabinet Exterior 2 1/4"-2 1/4”- 1 1/4” dia. vent hole surrounded by a wireway 3. 7 3/8” Top View (not to scale) Cabinet Exterior Door Height Adjustments Cut opening above floor: Board Height 32" 39" 31" 38" 30" 37" 29" 36" 28" 35" 27" 34" 26" 33" 25" 32" 24" 31" 23" 30" 22" 29" Page 2 Ironing Centers: E-342 and NE-342 Additional Information: • E-342 and NE-342 options include: Surface mount trim, oak raised panel door, maple raised panel door, pine raised panel door, white raised panel door, flat white door, plate glass mirrored door, no door at all, hot iron rest, electric cord wrap, garment bar, sleeveboard, spotlight (E-342 only) and a steam iron. Measurements when board is lowered (not to scale) • Door opens approximately 180°. Allow at least 16" to the side of the unit for door to swing open (door hinges on full length piano hinge) • Unit can be provided with a left hinged door upon request. Right hinge is standard. Wall \ Wall \ □ □ 2 3/4" Frame depth less...
Dieses Handbuch ist für folgende Modelle:Bügeleisen - E-342 (393.83 kb)