Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Bosch Dateigröße: 1.45 mb Dateiname: Unterrichtssprache:

• This is completely normal and will stop after a short while. • Clean the sole plate according to the cleaning instructions in this manual. Water flows through the holes on the sole plate. • The steam function is being used before it has reached temperature. • The water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. • Reduce the steam flow when ironing at low temperatures (With the steam control 3). • Point the iron away from the ironing area and press the steam release button (15) until steam is produced. Dirt comes out through the sole plate. • There is a build-up of scale or minerals in the steam tank. • Chemical products or additives have been used. • Mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. • Clean the sole plate with a damp cloth. • Never add products to the boiler water. The iron does not produce any steam. • The boiler is not switched on or the water tank is empty. • The water tank is not fitted onto the steam tank correctly. • The steam regulator is set to the minimum position. • Set the switch to the on (“I”) posi tion and/or fill the water tank. • Fit the water tank back onto the steam tank correctly. • Increase the steam flow by turning the steam control (3) to a higher setting. The ironed garment turns dark and/ or sticks to the soleplate. • The selected temperature is too high and has damaged the garment. • Select a suitable temperature for the material being ironed and clean the sole plate with a damp cloth. The sole plate turns brown. • This may occur after prolonged usage. • Clean the sole plate regularly with a damp cloth. The appliance makes a pumping sound. • Water is being pumped into the steam tank. • The sound will not stop. • This is normal. • If the sound will not stop, do not use the steam generator and contact an authorised technical service centre. Loss of pressure during ironing • Steam release button has been pressed for a long period of time. • Use the steam release button (15) with intervals. This improves the ironing result as the textiles will not be excessively damp and will iron easier. Water leakage from the boiler • Calc’n clean opening located at the bottom of the appliance is loose. • Tighten up boiler drainage plug with a coin TDS25.. GB Operating instructions Getting Started 1. Remove any label or protective covering from the soleplate (16). 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Remove the detachable water tank (1) and fill it, making sure not to overfill it. 4. Fit the water tank back onto the steam tank. 5. Unwind the mains cable fully and plug it into an earthed socket. 6. Set the main power button (6) to the on (“I”) position. 7. The ”Steam ready” indicator lamp (7) will light up after several minutes, indicating that the appliance is ready to use. The steam generator will take more time to reach ”Steam ready” state only upon the initial heating up, or after performing the de-scaling operation (Calc’n clean). When wate...

Herunterladen

Geben Sie zwei Ziffern: